2009 Adventurer 35Z adding washer/dryer

Thread Summary

Summarized on:
Original Member Title: 2009 Adventurer 35Z adding washer/dryer
This AI-generated summary may contain inaccuracies. Please refer to the full thread for complete details.
A member wants to install a washer/dryer in the dining nook of a 2009 Adventurer 35Z. The bathroom plumbing is nearby, an outlet is present, and the member is considering a vent through the slide, but is unsure how the water supply and drain would accommodate slide movement.

Members raised concerns about moving plumbing, drain access, dryer venting, and electrical load. One suggested reviewing the coach’s plumbing and wiring diagrams before choosing a drain route and circuit; the owner...
More...

JackHammerTattoos

New Member
Joined
Oct 25, 2026
Posts
5
Location
NY
Just bought an 09 Adventurer 35z and want to install a washer dryer, possibly where the dining nook is. Anybody with experience or advice?
 
I can drill a vent in the slide, and water is right on the other side of the wall in the bathroom. I'm wondering about the logistics of how much the water and drain pipe has to move with the slide out. There's an outlet there already for power assuming i buy a 110v unit
 
Movement of the supply and drain are never the best but it is soemthing to consider and do the best we can when we really to to do things? As long as you keep in mind the hazards and build for ease of repairs if needed?
have you looked at info on loading of electrical to avoid the more irritating thing of NOT using some item cnsidered dcritical when the washer is pulling power? It looks like there may be a couple choices there but that takes some thought about how much it might dirupt your normal use of things and always nice to work to the best choice. It looks like drain has a couple places to go with it that should work, but I always have to keep in mind that drawings may LIE to me!
Looks possible but I also never like drains that move! Assume the worst may hapen and build so it can be reached for any fix needed?
Have you found the drawings to do a bit more looking?
 
Movement of the supply and drain are never the best but it is soemthing to consider and do the best we can when we really to to do things? As long as you keep in mind the hazards and build for ease of repairs if needed?
have you looked at info on loading of electrical to avoid the more irritating thing of NOT using some item cnsidered dcritical when the washer is pulling power? It looks like there may be a couple choices there but that takes some thought about how much it might dirupt your normal use of things and always nice to work to the best choice. It looks like drain has a couple places to go with it that should work, but I always have to keep in mind that drawings may LIE to me!
Looks possible but I also never like drains that move! Assume the worst may hapen and build so it can be reached for any fix needed?
Have you found the drawings to do a bit more looking?
No, I'm in the pondering stage at the moment. When the slide is out there is actually quite good access to the area under the bathroom, and the side of the dining area is right there exposed too. And i realize i will need to make the outlet dedicated on it's own breaker.
 
Had them pulled up to take a look, so might pass on what I see as well as links to let you look more if needed?
Some ideas and you may find better?
adr1.jpg

Supply?
adr2.jpg

Electrical depends if you are 30 or 50 amp RV for which drawing but this seems very much the same on both but worth a check if you want to go for full new dirrcuit or tapped an old. There are a couple nearby if getting wire in is a big problem?
adr3.jpg

This circuit they call "BRN" may not be a big bother if not using the hair drier in bath?
schematic for 30 or 50 to look at what is on each if deciding to tap ratehr than add a whole new as it seems neither is loaded too heavy if not using the bath outlet for heavy item?
Good plan to do the checking and consider! Good luck to you as that always comes in handy!
 
My 2006 Adventurer 35A was already plumbed with water feed and drainage and venting. It even has a center mark to drill the hole for the outside dryer vent. I installed my Splendide Combo myself in less than an hour. You should check and see if your MH is already set up for install.. i've been from Pa. to Florida and everywhere in between in the 6 years since i installed it with no issues..
 
My 2006 Adventurer 35A was already plumbed with water feed and drainage and venting. It even has a center mark to drill the hole for the outside dryer vent. I installed my Splendide Combo myself in less than an hour. You should check and see if your MH is already set up for install.. i've been from Pa. to Florida and everywhere in between in the 6 years since i installed it with no issues..
Unfortunately the z doesn't have the plumbing or the spot ready for it. Gonna have to do a bit of redneck engineering.
 
No idea where you are on this but I might look at how my group operates and how much they are willing to do to make a plan work versus having it done better if a lot of trouble!
And I certainly can't see it as well, so consider this random noise if not fitting!
There looks like a bath outlet? Does it make any sense to leave it and just change an outle tat the dinette to do the waher? Would it be too awkward to avoid using hair drier while washing needed? If doing away with dinette, does that leave you a place to repurpose that?
awash.jpg

I see I did a brain freeze on this but meant to say convert to washer! Load center being on the right side of RV may make it tricky to get a new wire brought across??
 
No idea where you are on this but I might look at how my group operates and how much they are willing to do to make a plan work versus having it done better if a lot of trouble!
And I certainly can't see it as well, so consider this random noise if not fitting!
There looks like a bath outlet? Does it make any sense to leave it and just change an outle tat the dinette to do the waher? Would it be too awkward to avoid using hair drier while washing needed? If doing away with dinette, does that leave you a place to repurpose that?
View attachment 2528386
I see I did a brain freeze on this but meant to say convert to washer! Load center being on the right side of RV may make it tricky to get a new wire brought across??
I would run a new wire from a new breaker just for the washer/dryer. It needs it's own power supply... kludging is how fires happen.
 
JHT-

If it wasn't on a slide it's be easy to add a W/D in the bunk/wardrobe space. Not that it's impossible to add plumbing to a slide (plenty of floorplans have sinks on slides), but it's easier to do when the plumbing doesn't move. You will have that problem if you put the W/D in place of the dinette.

Alternatively, you could remove the "lounge chair" behind the passenger seat. The trick would be plumbing back to the galley drain. It might work better to use a drain pump (either the one built in the W/D or a separate one) to eliminate having to pitch the W/D drain piping from the W/D, forward of the stairwell, to the galley piping.

Lastly, on my coach I had "one too few" 120V breaker positions. To solve this problem I installed an Intellitec AES (Automatic Energy Switch), link here. The microwave and water heater shared the AES, and I swung the former dedicated water heater breaker/circuit over to the W/D. The AES worked well for this application.
 

Attachments

  • 2009Winnebago39ZFloorplan.png
    2009Winnebago39ZFloorplan.png
    148.8 KB · Views: 9
Last edited:

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top