2005 Journey 7-pin diagram UPDATE Found it!

[DNMakinson]

I have a Crosstrek set up for towing and have been towing it with a 2017 Jayco Greyhawk.

I needed to tow same car with 2005 Journey and none of the items worked... lights, turn / brake, charge circuit.

Either the pin-out is different between the motorhomes, or there is a problem that recently occurred on the Journey.

Please share the pin-out diagram so I can troubleshoot. The Winn diagrams only have Workhorse, and even then, don't show which pin is which signal.

DNM

UPDATE: FOUND THAT THE COVER ON THE CONNECTOR HAS THE DIAGRAM MOLDED IN.

 

[be happy]

If you need to check the fuses for the 7pin they are located in the power bay. There should be a panel w/door on the left side. The door will be held shut with screws, once the door is off or you can gain access you will see the fuses.

 

[DNMakinson]

NVM. Found that the cover on the connector has the diagram. That's how it should be done.

If you need to check the fuses for the 7pin they are located in the power bay. There should be a panel w/door on the left side. The door will be held shut with screws, once the door is off or you can gain access you will see the fuses.

Thanks. This MH has circuit breakers and fuses everywhere!