A member working on a 2002 Suncruiser 32V had a bedroom slide-out stuck while retracting, replaced the hydraulic pump after a mobile tech diagnosis, then realized the two connected relays had been disconnected without a reference photo. They asked if another owner could share a photo of the same relay wiring so they could reconnect everything and continue troubleshooting.
Another member suggested using the HWH manuals because jack and slide systems vary widely by series and option package...
More...
A member working on a 2002 Suncruiser 32V had a bedroom slide-out stuck while retracting, replaced the hydraulic pump after a mobile tech diagnosis, then realized the two connected relays had been disconnected without a reference photo. They asked if another owner could share a photo of the same relay wiring so they could reconnect everything and continue troubleshooting.
Another member suggested using the HWH manuals because jack and slide systems vary widely by series and option package, though the original member later identified the setup as likely an HWH 310 system with two rooms and two relays. The wiring issue was eventually fixed, and the member shared photos of the repair, which others noted could help future RVers facing similar wiring identification problems.