rottenkid

Thanks for the video. Yours as a LOT easier to reach though the hood opening than the Vista. I had to carefully get my head and part of a shoulder in side the compartment in order to reach the bulb.

It was easier to lock the replacement bulb in place and then attach the connector to the bulb.

Also, for future reference, it is better to wear gloves to prevent getting oils from your fingers on the bulb. Touching the bulbs with your fingers can sometimes cause premature failure. Also you want to keep the bulbs dry when installing, and for good measure apply some dielectric grease to the contacts to protect against corrosion.

It happens that the bulbs in our 2018 Vista are also H9..just a lot harder to access for the low beams.

Thanks again,

Hi Rottenkid,

Do you still have your 26HE? If so, I was wondering if you have ever removed the lounge chair (the chair behind the passenger seat)? I removed mine today because I find it simply useless and would rather have the space for our cat's litter box. The bolts for the chair are long and I want to make sure they are not holding anything else in place. I don't want to be driving down the road and have something fall off because I have removed the bolts. I looked the best I could and it does not appear the bolts are are holding anything else in place but the chair. Thanks! John