Quote:
Originally Posted by RicM
I am the new owner of a 2012 View 24G. I'd like to replace the incandescent bulbs with LED bulbs. As I see nothing referenced in the Operator's Manual or Supplement, nor screws holding the faceplates in place, how does one remove the interior light cover or the fixtures themselves. RicM
|
most of the lens are twist off....apply pressure upwards and twist, it should be as little as a 1/4 turn. As far as replacing from incandescent, that might be a little difficult....you make have to buy kits to make that change, but if you are going from incandescent to halogen, that is easy.Check on line for the conversion kits...I believe each light must have diodes to use led.