|
03-13-2014, 05:09 AM
|
#1
|
Winnebago Camper
Join Date: Sep 2011
Posts: 34
|
How to remove couch
need help on what to do to remove couch from 2005 Vectra.
|
|
|
03-13-2014, 05:14 AM
|
#2
|
Winnebago Owner
Join Date: Mar 2012
Location: Fulltime RVer
Posts: 212
|
I don't have your rig, but I would guess its like mine with bolts though the floor and you might see nuts in the basement?
|
|
|
03-13-2014, 05:25 AM
|
#3
|
Winnebago Master
Join Date: Oct 2010
Location: Apopka Fl.
Posts: 752
|
Quote:
Originally Posted by homeless
I don't have your rig, but I would guess its like mine with bolts though the floor and you might see nuts in the basement?
|
Some have nuts in the coach.
__________________
You Only Live Once Travel!
2013 Winnebago Tour 42QD
Apopka FL.
|
|
|
03-13-2014, 05:26 AM
|
#4
|
Winnebago Camper
Join Date: Sep 2011
Posts: 34
|
yes it is screwed to floor & foot pull out is also. I would like to know how much I have to do to get out the door.
|
|
|
03-13-2014, 05:27 AM
|
#5
|
Winnebago Owner
Join Date: Oct 2012
Location: Land O Lakes, FL
Posts: 111
|
Quote:
Originally Posted by 2005VECTRA
need help on what to do to remove couch from 2005 Vectra.
|
Permanent or temporary removal ?
__________________
2005 Newmar Essex 4502, 2013 Caddy SRX
1997 HR Endeavor 37, CAT, 1996 Geo Tracker
|
|
|
03-13-2014, 05:42 AM
|
#6
|
Winnebago Camper
Join Date: Sep 2011
Posts: 34
|
permanent removal.
|
|
|
03-13-2014, 05:44 AM
|
#7
|
Winnebago Master
Join Date: Oct 2010
Location: Apopka Fl.
Posts: 752
|
Quote:
Originally Posted by 2005VECTRA
need help on what to do to remove couch from 2005 Vectra.
|
I removed a couch in and it was quick. Pretty straight foreword. If your couch is electric you will have to unplug the power to it. It is a bit awkward to get out the door.
Jesse
__________________
You Only Live Once Travel!
2013 Winnebago Tour 42QD
Apopka FL.
|
|
|
03-13-2014, 05:48 AM
|
#8
|
Winnebago Owner
Join Date: Dec 2000
Location: Weatherford, Tx 76086 USA
Posts: 57
|
the arms come off. the back comes off, and the mattress can come off. Once you get it loose and in the middle of coach, you can get to the back and see how everything is attached. slide co-pilot chair all the way back, if you have a front entry.
__________________
Ernie Ekberg, Prevost Liberty XL Classic
|
|
|
03-13-2014, 05:52 AM
|
#9
|
Winnebago Owner
Join Date: Oct 2012
Location: Land O Lakes, FL
Posts: 111
|
Assuming it is in a slide, they typically have "special" bolts that go up thru the bottom of the slide, then thru the frame of the sofa, and then have washers and nuts. Usually there are seat belts bolted to the floor behind the sofa. Sometimes you will need to disassemble the sofa to get it out the door.
How you deal with the bolts depends on what you are planning for that area after the sofa is gone.
__________________
2005 Newmar Essex 4502, 2013 Caddy SRX
1997 HR Endeavor 37, CAT, 1996 Geo Tracker
|
|
|
03-13-2014, 07:51 AM
|
#10
|
Winnebago Master
Join Date: Dec 2003
Location: Motor City, Mich
Posts: 1,003
|
I think I have the same arrangement as you. HWH flat floor slide with a Rest Easy couch in a Winnebago product.
Mine is just screwed down. Dozen or so screws. No bolts through the floor or anything like that.
__________________
Tim.
|
|
|
03-13-2014, 05:32 PM
|
#11
|
Winnebago Master
Join Date: Sep 2005
Posts: 962
|
They come apart.
1) Extend about half way ... lift up seat ... remove 4 nuts
2) Remove one screw ... the front comes off
3) Remove 4 bolts and remove arms
4) Extend all the way ... remove 4 nuts ... back comes off
|
|
|
03-15-2014, 02:19 PM
|
#12
|
Winnebago Master
Join Date: Jun 2013
Location: Full-timer/volunteer w/SOWERS
Posts: 2,737
|
Quote:
Originally Posted by 2005VECTRA
yes it is screwed to floor & foot pull out is also. I would like to know how much I have to do to get out the door.
|
I take it you are removing the sleep sofa? My last coach was a '05 Vectra 40FD and the couch had electric motors to extend the seats into the bed. If this is what you have it is very easy but takes time.
Lift a seat and you will see 4 nuts holding it to the frame. Remove the nuts and the seat will come off. Do this for the back also and the other 2 cushions. This couch can be completely disassembled in this manner making removal very easy, one part at a time.
There was someone on this forum a few months back looking for the footrests. I hope they view your post. You may be able to sell the parts.
__________________
Rick & Melissa Young & Dawson (RIP), 2011 Meridian 40U, FL XCL, ISL 380HP/DEF, Al 3000 MH, 2014 Honda CR-V, SMI AF1, Blue Ox TruCenter & tow equip.,EEZTire TPMS.
Servants On Wheels Ever Ready. Best job we ever paid to do . (full time volunteers)
|
|
|
03-30-2014, 06:47 AM
|
#13
|
Winnebago Camper
Join Date: Sep 2011
Posts: 34
|
Thanks have removed the couch. Now will place new receliners & build a new end table. I would like to know how to remove the stud bolts that are used to keep old recliner in place when moving. It seems to be a carrige bolt from botton of slide.
|
|
|
03-30-2014, 06:50 AM
|
#14
|
Winnebago Owner
Join Date: Mar 2012
Location: Fulltime RVer
Posts: 212
|
If you cant beat them down, I had to use a saws all with hacksaw blade
|
|
|
03-30-2014, 09:48 AM
|
#15
|
Winnebago Camper
Join Date: Jan 2013
Location: tomball texas /north of houston
Posts: 35
|
old couch
do you still have the old parts .the front arrangement off mine is no longer there.if you could post pictures and measurements that would help. thanks
|
|
|
03-31-2014, 06:03 AM
|
#16
|
Winnebago Master
Join Date: Jun 2013
Location: Full-timer/volunteer w/SOWERS
Posts: 2,737
|
Quote:
Originally Posted by 2005VECTRA
Thanks have removed the couch. Now will place new receliners & build a new end table. I would like to know how to remove the stud bolts that are used to keep old recliner in place when moving. It seems to be a carrige bolt from botton of slide.
|
I removed the bolt on my old '05 Vectra. Look under the slide, under where the chair floor area. You will see the head of a carriage bolt. Get a big hammer and beat the little sucker from the top down through the floor. Once it is down to the floor level you can go back under and cut the bolt shank off. If I recall correctly, it will drop through the floor but not come out the bottom. Seal the hole under the coach with a good grade aluminum duct tape. A dremmel works good for knocking down burs.
__________________
Rick & Melissa Young & Dawson (RIP), 2011 Meridian 40U, FL XCL, ISL 380HP/DEF, Al 3000 MH, 2014 Honda CR-V, SMI AF1, Blue Ox TruCenter & tow equip.,EEZTire TPMS.
Servants On Wheels Ever Ready. Best job we ever paid to do . (full time volunteers)
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Recliner couch bed
|
jk_and_dog |
Winnebago General Discussions |
6 |
09-08-2007 04:35 PM |
Removing the couch
|
Big Ben |
Winnebago General Discussions |
9 |
09-03-2007 04:50 PM |
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|