|
06-21-2017, 04:54 AM
|
#1
|
Winnebago Camper
Join Date: May 2014
Location: St Paul MN
Posts: 47
|
Water Pump Noise
I have noticed in my 2016 Sunova that the water pump is the noisiest of any motorhome I have owned. Has anyone found something to quite that down? I get up in the night to use the restroom and don't want wake my wife.
__________________
Marianne & Jerry
2016 Itasca Sunova 35G Honor Guard Fort Snelling Natl Cemetery, USS Decatur DDG-31 71-75
|
|
|
06-21-2017, 08:17 AM
|
#2
|
Winnebago Owner
Join Date: Feb 2015
Posts: 153
|
I feel your pain!! In all my endeavors to solve this problem I have only found two things that HELP. Help not solve. Re-plumb the inlet and outlet hoses to the pump with enough hose to make a large loop in them. This will reduce the vibration from the pump being transferred to the pex plumbing running to the fixtures in the coach. Reduce not solve. Then if you have the room install a two gallon expansion tank on the output of the pump. It simply tees in to the outlet line. This tank will come pre-charged to about 25 lbs. pressure. This needs to be reduced to a couple lbs below the start pressure for the pump. I did this by slowly letting off the pressure until the pump started after letting it pressure up after install. Now we can run enough water to flush and do a quick rinse of hands without the pump starting. When the pump DOES start it runs a bit to refill the tank but no more cycling when running a slow stream.
This is NOT a fix for the noise but does make it livable.
__________________
WE WORK HARD SO OUR DOG CAN HAVE A BETTER LIFE
2005 ADVENTURER 38J
|
|
|
06-21-2017, 08:41 AM
|
#3
|
Winnebago Watcher
Join Date: May 2017
Location: Vancouver Wash
Posts: 2
|
Rubber isolation pads under the feet also help, and not screwing it down so tight.....
__________________
2010 Rockwood Sig Ultra lite 5er 8280......'99 Ram 2500, Cummins......Retired....but work part time as a pain in the arse....
|
|
|
06-21-2017, 08:55 AM
|
#4
|
Winnebago Master
Join Date: Dec 2009
Location: Out there, somewhere
Posts: 1,742
|
I had the same problem in an older class C quite a few years ago. My solution was kind of unique. I created enough "slop" in all the lines leading to and from the pump. Then, I headed down to a local place that sells foam and upholstery fabric etc. There I scrounged around in their rements of foam and picked out some blocks of foam about 12" x 12" x 6" thick. I got two of them for nothing.
I then sort of, carved out an imprint of each side of the pump, on each piece of foam. Then, using some tape, I encapsulated the pump in between the two large pieces of foam and taped the two pieces together, with the pump completely isolated from any mounting.
Talk about QUIET!
The only problem with doing it that way is, it was so quiet that, if anything should go wrong, i.e. broken water line, leaked developed, someone not turning a faucet off completely, almost could not be detected in the water pump cycling.
Scott
__________________
2004 ITASCA HORIZON 36GD, 2011 GMC Sierra 1500 4x4 Toad '08 GL 1800 Gold Wing
Retired-29.5 yrs, SDFD, Ham - KI6OND
Me, Karla and the Sophie character, (mini Schnauzer)
|
|
|
06-21-2017, 09:06 AM
|
#5
|
Winnebago Master
Join Date: Nov 2011
Location: Full time RV'er
Posts: 1,177
|
Quote:
Originally Posted by FIRE UP
Snip---
Talk about QUIET!
The only problem with doing it that way is, it was so quiet that, if anything should go wrong, i.e. broken water line, leaked developed, someone not turning a faucet off completely, almost could not be detected in the water pump cycling.
Scott
|
Hah! And this is exactly why I only did the loosening of the mounting bolts on mine to get it a bit quieter. The noise is a clever, if accidental, 'tell-tale' for us full timers. Being able to hear the pump running tells us if the tank is getting low on water as a louder pump usually means it's getting time to add water to the tank, and it's excellent at telling us if there's a leak and how big it is. Use water, the pump runs and stops. Then in the quiet, listen for the next time the pump runs. I should take hours. If it's only a minute or two, you have a leak that needs to be tracked down. (And it could simply be the shower head wasn't turned off--still, that water ends up in the grey tank).
And if it is running periodically when it's not suppose to, that reminds you that you need to turn off the pump before retiring.
Buy earplugs if the sound is a problem for anyone.
|
|
|
06-21-2017, 09:46 AM
|
#6
|
Winnebago Camper
Join Date: May 2014
Posts: 11
|
Hi Jerry. I am glad you brought that up. Kathey complains about the noise too. But I think I will have to wait on cooler weather. I was thinking rubber mounts and a foam cushion. Ours is mounted to a side wall...B T W we will be in Tucson in December . Jerry. Sk2
|
|
|
06-21-2017, 12:45 PM
|
#7
|
Winnebago Owner
Join Date: Mar 2017
Location: Alaska in Summer Snow Birds in Winter
Posts: 79
|
Quote:
Originally Posted by FIRE UP
The only problem with doing it that way is, it was so quiet that, if anything should go wrong, i.e. broken water line, leaked developed, someone not turning a faucet off completely, almost could not be detected in the water pump cycling.
Scott
|
Yep.
__________________
Tom and Sherry W.
06 Winnebago Adventurer 38J Workhorse W24 Lots of motor and suspension mods in the works
02 Itasca Suncruiser 35U. Workhorse W22 w/Safe-T-Plus, Koni FSDs, UltraTrac, etc, etc.
|
|
|
06-21-2017, 08:55 PM
|
#8
|
Winnebago Owner
Join Date: Jun 2007
Location: Coaldale, AB
Posts: 64
|
It depend on how we are parked some times its loud enough to wake the dead and other times it is real quiet. Now if I could only figure out what way to park to make it quiet.
__________________
05 Itasca Sunova 29R
|
|
|
06-21-2017, 09:05 PM
|
#9
|
Winnebago Master
Join Date: Nov 2011
Location: Full time RV'er
Posts: 1,177
|
Quote:
Originally Posted by TAN
It depend on how we are parked some times its loud enough to wake the dead and other times it is real quiet. Now if I could only figure out what way to park to make it quiet.
|
I've found the only way to quiet it (and mine isn't all that loud), is to keep plenty of water in the tank. As the water level drops, it gets louder.
|
|
|
06-22-2017, 07:05 AM
|
#10
|
Winnebago Master
Join Date: Nov 2005
Posts: 1,080
|
The easiest way to silence the pump is to install an accumulator and a silencer kit. The accumulator allows the pump to run less often and at full speed when it does run. The silencer kit is nothing more than 2 short lengths of flexible tubing that will absorb the pulsations generated by the pump. We installed both and our pump is now silent.
Accumulator:
http://www.campingworld.com/shopping/item/shurflo-accumulator-tank/2290
Silencer kit:
http://www.campingworld.com/shopping/item/shurflo-pump-silencer-kit/29361
Winnebago used to install flexible PVC tubing throughout the coach. Because of its flexibility it deadened the sound of the pump. They now install PEX which lasts longer and has fewer leaks, but it’s also much more rigid and as such transmits sound better.
__________________
Hikerdogs
2013 Adventurer 32H
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|