The poop luge
So I made this set up a while ago and it has worked perfectly every time so I thought I would share it with everyone.
Itís very simple - cut / rip a piece of 4in PVC in a little less than half so it will fit in your rear bumper. I made three pieces that fit in the bumper, a 7.5 ft. Piece and a 5 ft and a 2.5 ft. for the application at hand.
I used a elastic strap to hold it to my discharge pipe and just let it run down hill to the sewer and your stinky slinky fits right down inside nicely. My favorite part about it is that it is stored outside the camper so Iím not worried about if it gets messy.
I also store the stinky slinky in a aluminum box mounted to the bumper as seen in the last pic.