Hi all I own a 2001 Winnebago Itasca Horizon, it has a automatic winterizing system which has always worked well. This time after dewinterizing the hot water heater does not fill and no hot water flow from faucets or shower. If I turn the bypass back on water comes to the faucets and shower but not to the hot water heater tank. The bypass control is located next to the washer dryer does anyone know how to resolve this problem any help would be much appreciated The water heater is a 10 gallon Attwood I am attaching a picture of the bypass switches.
Thank you
Andy Allen
I am somewhat amused and at the same time distressed as our MHs get more and more automated: AGS, ATS, load shedding, etc. These I can sort of understand because they can happen every hour of every day.
But an automatic winterizing system for an RV that probably only gets winterized once every winter, wow!!! And it takes 5 minutes if you do it manually. It will take a lot more than 20 years of 5 minuteses for the OP to get that system fixed.
Linear Mode
