Removing Magnadyne Radio

kehardman · 06-01-2011, 04:42 AM

OK, How do you remove a Magnadyne 9900 from a 2002 Suncruiser?

Any help welcomed

skigramp · 06-01-2011, 06:06 AM

In your big black "users manual" bag you should find two large wire U's

insert them into the slots in the front of your radio ... that will unlock the radio and it pulls out ...

John Hilley · 06-01-2011, 08:16 AM

Check here for

Magnadyne 9900 Manual

Shows you how to remove

kehardman · 06-01-2011, 02:20 PM

Quote:

Originally Posted by skigramp

In your big black "users manual" bag you should find two large wire U's

insert them into the slots in the front of your radio ... that will unlock the radio and it pulls out ...

That is kind of one of my problems. My big black "Users manual" does not have the two large wire U's. I purchased motorhome second hand.

I will look again just to make sure.

kehardman · 06-01-2011, 02:21 PM

Quote:

Originally Posted by John Hilley

Check here for

Magnadyne 9900 Manual

Shows you how to remove

OK, my sight is dimming. I looked through the manual and found how to install, but not how to remove. Will take another look.

RVRon · 06-01-2011, 02:27 PM

Go to a Ford dealer if you can't find the u-tools. They use them for a lot of Ford radios. As for removal, insert the tools in the holes on the side and push outward with both tools at the same time...then while keeping them spread, pull the radio out with the tools.

kehardman · 06-01-2011, 02:34 PM

Quote:

Originally Posted by RVRon

Go to a Ford dealer if you can't find the u-tools. They use them for a lot of Ford radios. As for removal, insert the tools in the holes on the side and push outward with both tools at the same time...then while keeping them spread, pull the radio out with the tools.

Would a Wire Coat hanger do the same?

Wayne M · 06-01-2011, 02:39 PM

I believe the wire coat hangers, cut and bent to the U would work. It just depresses on a spring If I remember correctly. Nothing to loose by trying it.

kehardman · 06-01-2011, 04:24 PM

Quote:

Originally Posted by Wayne M

I believe the wire coat hangers, cut and bent to the U would work. It just depresses on a spring If I remember correctly. Nothing to loose by trying it.

I decided to go and check my "magic Winnebago Bag" and there underneath everything were the u shaped rods. Popped it right out.

Thanks

bukzin · 09-15-2016, 06:41 PM

I used four nails. You can push in all of them at once and the radio
kinda pops forward.

Very simple, no skill job.