RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×

Thread Tools Search this Thread Display Modes
Old 11-26-2020, 08:01 AM   #1
Winnebago Camper
Join Date: Oct 2020
Posts: 19
Winnebago Minnie 2401RG (Rear Galley) EMS Install?

Hello, I think I've decided to go with a hardwired EMS device instead of a portable surge protector device.

We have a 2020 Minnie 2401RG. Can anyone tell me where this should be installed, and how much of a hassle it would be?

There's a fusebox near the kitchen floor, below the control panel. Also, above the dinette is the stereo unit, and the sales person said the cabinet space behind it contains various wiring. That might just be related to the stereo and TV, but I saw a YT video where an owner of another trailer installed his back there.

Thanks in advance!

johneed is offline   Reply With Quote
Old 11-26-2020, 03:49 PM   #2
Winnebago Owner
SummitPond's Avatar
Join Date: Feb 2019
Location: NE Florida/SE Maine
Posts: 119
I'm not sure where your shore power enters the TT or your distribution panel is located. I have a 2500FL and put the EMS under the closet floor adjacent to the distribution panel. I ran the cable for the display to come out of the louvers for the heater air intake; it's far enough from the heater box not to be an issue.
Attached Thumbnails
Click image for larger version

Name:	IMG_3170.jpg
Views:	5
Size:	217.9 KB
ID:	175977   Click image for larger version

Name:	IMG_3171.jpg
Views:	4
Size:	215.7 KB
ID:	175978  

TT: 2019 Minnie Winnie 2500FL, e2 WDH; former 2015 Keystone Bullet Premier 19FBPR
TV: 2012 Ford F-250 Lariat Super Duty Crew Cab (gas 6.2 L, 3.73 gear ratio 2WD, 172" WB)
SummitPond is offline   Reply With Quote
Old 11-26-2020, 05:18 PM   #3
Winnebago Owner
Join Date: Aug 2020
Location: Sandy Eggo
Posts: 194
Your shore power enters the wall behind your sink cabinet. If you remove the right side false panel under your sink, you will see the backside of the shore power connector and 10/2 romex that feeds your power center. There is room here, but there is a lot of plumbing in this location, so I'd choose elsewhere. The cable should run aft, behind the drawers and range to the power center. Behind the power center is probably the best location, but there might be room behind the drawers too. Make sure to get a remote display or a model with bluetooth, as none of these locations will be visible.
2020 Winnebago Minnie 2401RG
2014 Ram 2500 CCSB 4x4 6.7CTD
Old Navy is offline   Reply With Quote

ems, install, winnebago

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
First RV: 2020 Winnebago Minnie 2401RG johneed Welcome Mat 2 10-31-2020 12:08 PM
New to the forum - 2019 Minnie 2401RG Attila Welcome Mat 2 09-21-2020 02:18 PM
Backup lights 2401RG Minnie Duane652000 Electrical | Charging, Solar and Electronics 6 01-15-2019 09:24 PM
New to Posting! New to our Minnie 2401RG rharms Welcome Mat 8 10-08-2018 10:53 PM
Want to install built in vac in Itasca Horizon 40AD, like to know how factory install kbdavidson Winnebago General Discussions 12 06-30-2011 10:13 PM

» Featured Campgrounds

Reviews provided by


This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 04:07 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.