Slide out power question

[Bigbird65]

Originally Posted by backtrack15

The "a" or "b" is just the half-year model differentiator. 2021B are 2021 model year built after 8/1/20. This year saw a host of mid-year changes.

Photo of breaker location:
https://www.winnieowners.com/forums/...icture2006.jpg
It is labeled as SHORTSTOP 24V 30A. It looks like it has a very small button on the right end that will pop out if the breaker trips.

Photo of junction box internals:
https://www.winnieowners.com/forums/...icture2007.jpg

Thanks

[Bigbird65]

backtrack15 here is a drawing of that pesky breaker out of the box.To keep it simple I left the solar and power jack off.

[backtrack15]

Originally Posted by Bigbird65

backtrack15 here is a drawing of that pesky breaker out of the box.To keep it simple I left the solar and power jack off.

Thanks for taking the time to make this and the original.

[Bigbird65]

Originally Posted by backtrack15

Thanks for taking the time to make this and the original.

Glad I can help. Do you know if other 2021 Minnies of Micro Minnies have this fix?

[backtrack15]

I’m afraid I do not know what the 2021A versions of the Micro Minnie look like in terms of wiring. I have no knowledge of the Minnies or Hike trailers either.

[Bigbird65]

I found out from another Winnebago that a guy's early build 2020 Micro Minnie had the fix on that breaker.

[Rick 99037]

I'm glad to see your answer was so simple. I'd just throw in the mix that our RV inverters can't supply near the current a 100AH rated deep cycle battery can supply, and so likely batteries assistance for some higher demand uses.
As such, I'd wondered what the rated draw was to run your slide out. I know that when I push the levelers down, It seems to require well beyond my RV invert's 45AH output.