Range/Oven to Cooktop Conversion

[Bcborn]

Here is the Suburban in Canada. Converting from US Funds it would be fairly cheap.

https://www.amazon.ca/Suburban-2985A...00T37ET7G&th=1

Furion on Ebay

https://www.ebay.com/itm/25573784535...Bk9SR8K7p6KHYg

[Bcborn]

The Drawer fronts arrived for Winnebago last fall and I figured it was time to complete that project.

All that is left is to install the spring loaded catches (extra security) so the drawers don't slide open.

More details in my album.

[tinglett]

Lyle, that looks awesome! From your photo, I'd never know that wasn't the original setup. You'll like that added storage.

[Bcborn]

Yes Todd must agree the extra storage is sooo nice.

I would like to remove the do the microwave as did you, for additional storage. Winnebago doesn't have the door size I want (10 5/8" x 16 1/2").

Winnebago suggested I contact the door manufacturer for custom doors. The manufacturer of Winnebago Cabinet Doors, Four Woods Laminating (division of Kabri Products) in Topeka won't respond to emails.

[tinglett]

I ended up making my own doors. It was a PITA, but they came out ok. I got the matching hardware from Winnebago. It's a pretty cavernous space, too. While I lined it with maple plywood, I can remove the doors and slip the microwave back in place if I ever sell the TT. The next guy might want to microwave those TV dinners, after all!

I've since put in some dividers and such to organize it, but don't seem to have any photos floating around. But you can imagine that bit.

[Bcborn]

Originally Posted by tinglett

I ended up making my own doors. It was a PITA, but they came out ok. I got the matching hardware from Winnebago. It's a pretty cavernous space, too. While I lined it with maple plywood, I can remove the doors and slip the microwave back in place if I ever sell the TT. The next guy might want to microwave those TV dinners, after all!

I've since put in some dividers and such to organize it, but don't seem to have any photos floating around. But you can imagine that bit.

My biggest issue here, I cannot find any shops with the cabinet door router profiles. One shop has a similar profile and the shop that stained the new uprights on either side of the stove drawers can stain the doors if need be.

If anyone knows where I can find the router bits or a shop that has the same profile or connections with the cabinet door manufacturer I would be thankful for that info.

[tinglett]

Originally Posted by Bcborn

If anyone knows where I can find the router bits or a shop that has the same profile or connections with the cabinet door manufacturer I would be thankful for that info.

I looked all over the place for a router bit that's even close and had no luck. In the end I made mine with a CNC.

But really, if you get reasonably close I really doubt anyone will notice. Maple is a good match for the color cabinets we have, and a difference in profile will probably just be seen as "oh, the cabinet above the stove is special." The toughest people to convince are ourselves, I'm afraid.

[RocknRoll]

@tinglett and @bcborn

Wow, both of you did a remarkable job on those mods.

I certainly wish I had that skill set.

[tinglett]

Lyle,

How about a custom door like this one from Rockler? https://www.rockler.com/adobe-5-piec...-and-materials I know the outer edge isn't quite right, but if made in maple I really doubt it'll jump out as "wrong" at all, especially if you add all the original Winnebago hardware to it.

[Bcborn]

Thanks Todd for that information. By the way I like your idea of lining the cavity and putting in a shelf.

I went back through my list of Winnebago available cabinet doors in the Stichlach Champange profile/color scheme, which is the earlier Micro Mini design. Two door sizes are available that are close to my requirement 10 5/8" x 16 1/2" (matches typical reveal around door).

1) 11" x 15 1/2"

I have 2 of these as the plan is to make a dinette at some point. Using these two doors puts the hinges pretty much side to side between the left plastic trim and the fridge wall with no setback.


2) 10 1/2" x 15 1/4

Going with option 2 is likely the best option, if custom match is not an option. These two Doors will be set down from the ceiling 1" - 1 1/4" more than any other door in the trailer, but the profile will match 100%. The reveal on the side would pretty much match the current microwave trim.

I sent an email to Winnebago Customer Service to see if they can assist with ordering two custom doors, If that's not an option I will order two of my second option doors above.