Leak in my shower stall. Fixed.

raytwntrvlr · 05-13-2023, 01:55 PM

Last year I posted about detecting a leak somewhere behind the shower wall of my Micro Minnie. Now, with the warmer weather and the garden planted, I decided to investigate.

A few suggestions were given me last year and one was spot on. I removed the trim screws along the shower wall and was able to access the faucet control plumbing. Just as another poster had mentioned, the hot water connection was just about finger tight. I was able to reach in with a pair of channel-locks and get it tightened. The leak is gone. I would like to thank the guy who gave me that suggestion. His info however is buried somewhere in a long ago closed thread.

raytwntrvlr · 05-13-2023, 04:17 PM

The great suggestion...
"Check the screw fittings on the shower fixture. It should just be 4 screws and a bit of scraping to remove the caulk. I had a similar issue in my 1800BH. The fittings were only finger tight. Same on the fittings to the outdoor shower. Just tighten them up and you're good to go."

Was made by rstraz.

Wherever and whoever you are, thanks for giving me the path to a fairly easy repair.