Good luck. I only suggested scarfing out the wall behind the wall if you didn't have any other options.
That's why I opted for the Tetford aqua magic II - the "rough in" dimensions were close enough to the actual room I had available,
Thanks for your input. I will bring the trailer home tonight to get a better idea of how to proceed. 👍
Just so you know.
Behind the rear wall is only batting insulation. So, it may be possible to etch out just enough space around the toilet where it meets the rear wall so the 310 will seat without affecting rear wall integrity. If it’s jus a quarter inch, shouldn’t be a problem.
I brought the trailer home and I was thinking to try to push the toilet down more while putting a little pressure on the back wall. However, this was unnecessary, for it is sitting flat. I'm not sure how, but it is completely flat. So, this is good news 😄
We will see how the weekend camping trip goes 😊
Thank you for contributing your help to me 👍