Installed a USB Powered Fireplace in our 2106DS
Installed a small USB powered fireplace in the cabinet below the TV for some ambiance. The fireplace fits perfectly between the front cabinet trim pieces and is controlled by a USB timer. The fireplace is secured it in place by a screw from behind and silicone sealant around the front edges which allows for future removal if needed.
Also installed a power station on the shelf below the TV using a three hole power pod fused at 10 amps. The pod will power the inverter for the TV, the USB fireplace/timer plus additional 12V or USB powered devices if needed. To power the pod I tapped into the wires that are used to power the slide. Those wires run through the bottom of the same cabinet and are 10 AWG fused for 20 amps. By using this circuit, we can control the power to the pod by using the power switch for the slide.
Below are some pictures taken during and after the install.
__________________
2016 Winnebago Micro Minnie 2106DS, 200Ah BB, 400w rooftop & 500w front cap solar
2020 Tundra SR5 DLCB TRD Off Road, 5.7L V8 w/6.5' bed & 38 gal. tank, 4.30 axle ratio
Blue Ox Sway Pro w/750# bars, wired RVS rear view camera, Renogy 20A DC/DC charger
|