|
DIY Black tank hose holder for $25
I was always fighting the black tank hose with the bumper when pulling it out or storing it and was always afraid of breaking it one of these days. So I made my own $25 hose holder. Best part is you can store the complete hose and elbow so you dont have to store the elbow in the cabin or anywhere else thats a clean zone. I used a 6" drain hose, zip ties, metal wiring for extra support and rubber twist ties as a door on both ends. Now I can easily store and remove the hose without ever fear it will be stuck or breaking in the bumper. The drain hose is super light but strong and zip ties are more than enough to hold up to the bumper. The grooves in the drain hose also do a great job of holding the hose in place during transit, it will pretty much not have any side to side movement.
|
Linear Mode
