Quote:
Originally Posted by Dave73
Hi all, i have a 08 outlook 31c and when i went to level it i noticed a problem...anywhere i put the level it reads different. I first tried the floor in mid vehicle and didnt seem rite, then put it on the counter and that read totally different...ugh...then figured i would read in the bottom of the fridge and that read different as well.
I bought the levelmate pro to help me with leveling but need to level unit to install it. Problem is whats level?
|
Yeah, that’s a tough one, since the counter tops, refrigerator, or even floor at different points will give you various readings.
In order to set my rig level, for the Level Mate Pro, I used a large bubble level, and a pinball. The pinball actually works the best (any smooth steel or glass ball will do), because what you really want to know, is not what surfaces in the coach are level, but the overall feeling of the coach.
So if the ball is rolling in any one direction dramatically, that provides you with a clue as to where levels is, and I might add, if the ball is chasing it’s way across the floor, you’re probably going to be feeling the coach as uneven.
Because really what you’re trying to do is get the coach level to within a half an inch while you’re inside , so that you don’t feel dizzy when walking around. The human body is pretty sensitive to uneven surfaces and tilt.
I think the best way to set a zero level calibration would be at a weigh station, IMHO.
Now that I have are zero point calibration set I can get it within a quarter inch on all angles and it’s amazing how fast you can set up your rig with the LevelMatePRO and in our rig, the Lippert jack system.