Mounting additional TVs on 2015 Winnebago Minnie Winnie 22R
Hi there,
I bought 2 27 inches TVs and plan to mount one in the master bed and the other in the storage compartment of the 2015 Minnie Winnie 22R (Open the storage door and enjoy outdoor TV). According to the diagram, the "optional TV" can be mounted on the side wall (on the side of the refrigerator). Any recommendation where to find the right spot for the mounting screws? I worry that I could hit a spot that cannot support the TV weight (or damage the refrigerator). Thanks
I bought 2 27 inches TVs and plan to mount one in the master bed and the other in the storage compartment of the 2015 Minnie Winnie 22R (Open the storage door and enjoy outdoor TV). According to the diagram, the "optional TV" can be mounted on the side wall (on the side of the refrigerator). Any recommendation where to find the right spot for the mounting screws? I worry that I could hit a spot that cannot support the TV weight (or damage the refrigerator). Thanks
I would need to see what’s behind the panel before mounting a tv.
This is an example if what it could look like:
Jesse
Since there is power and an antenna connector on the wall I would think that wall would have plywood backing in it to hang a TV. My 2016 26he did.
Terry in Kalamazoo
__________________
Terry D.
2016 Winnebago Vista 26he
Retired Plumber/Pipefitter UA Local 357
Since there is power and an antenna connector on the wall I would think that wall would have plywood backing in it to hang a TV. My 2016 26he did.
Terry in Kalamazoo
Thanks Terry! Yes I called Winnebago yesterday (very helpful as always)and they confirmed it is fine to mount. I also found the schematics which outline the TV location and actually give the model of the 12v Insignia TV! But of course its no longer available. So my quest to find a 12v LCD continues. Most all now are 19v. Unless you spend the money for a "RV" model, which is always higher.
I got a 20" RCA TV/DVD combo rtdvd2005 for $95 from Walmart. The swivel bracket from General RV was another $90. I had planned to use a 12v to 120v converter to run it until I found it was actually a 12v with an ac adapter! Good luck!
Terry
__________________
Terry D.
2016 Winnebago Vista 26he
Retired Plumber/Pipefitter UA Local 357