They are generally self limiting and are not user “adjustable.” You want to resync them. There are plenty of YouTube vids on this but the usual process is to run them all the way out and all the way in repeatedly.
Always go all the way in or out and not stop mid-activation and when you hear the motor(s) whine at the end keep holding down the button. That whine sound is the motor torquing out and is good for the motor.
I hold down the button a good 5+ secs after everything stops. Then after I release it I push the button again and you can hear the motors move then click. That clicking is syncing. I repush the button until the motors no longer react and click.
I do this every time I use my slides.
This should fix everything, but if the slide is way out alignment you may need professional help.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
|