CatStrap Installation on a Minnie Winnie 22M

[Eagle5]

Here is my CatStrap installed on my Minnie Winnie 22M. I used one 3" Muffler Clamp and three 3½" Muffler Clamps.

View from passenger's side; the Catalyst is to the right.


View from passenger's side; the Catalyst uses six straps for the two hoops.


View from passenger's side looking forward.


View from driver's side; forward is to the left.


Exhaust pipe for the passenger's side cylinders; this one spot uses the smaller 3" clamp.

Thanks, Eagle5

[macnut]

Thanks for the photos!

[Our ride]

Don't want to piss on your parade but all they have to do is cut clamps ( they have a sawzall) cut wire ties then cut cat pipe.maybe ten more seconds of work for the thieving ba$tards.

[Eagle5]

Hi Our ride,
The CatStrap does have a heat-activated phenolic adhesive that cements itself to the pipes & catalytic converter over the course of 200 miles of driving. That, coupled with the three encased cables, certainly will slow them down. For $160, it does discourage theft, and I believe it is worth it.
Thanks, Eagle5