|
08-01-2021, 06:03 AM
|
#1
|
Winnebago Camper
Join Date: Jul 2021
Posts: 43
|
Bumper - Sewer Hose
Does anybody know what brand sewer hose will fit in the 4” bumper? My Rhinoflex hoses do not fit; the head of the bolts Winnie uses to fasten the bumper to the frame get in the way. The bolt heads are inside the bumper.
__________________
__________________
2022 Minnie Winnie 26T
|
|
|
08-01-2021, 08:44 AM
|
#2
|
Winnebago Master
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 3,583
|
You might want to forget the bumper and get one of these:
https://www.amazon.com/Valterra-Adju...7829007&sr=8-1
__________________
Bob C
2002 Itasca Suncruiser 35U
Workhorse Chassis
|
|
|
08-01-2021, 09:35 AM
|
#3
|
Winnebago Owner
Join Date: Oct 2019
Posts: 103
|
I never had an issue with getting my hose to fit in a bumper, but I always kept losing end caps. I now have the hose carrier that BobC listed, best thing to date to carry a hose and allows me to carry 20ft of hose without issue since the end caps lock.
__________________
2021 Elkridge 37BAR
2020 F450
|
|
|
08-03-2021, 07:46 AM
|
#4
|
Winnebago Owner
Join Date: Nov 2018
Location: DE.
Posts: 248
|
That looks like a nice solution. Does it mount to the top of the existing square bumper?
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
|
|
|
08-03-2021, 09:02 AM
|
#5
|
Winnebago Master
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 3,583
|
Quote:
Originally Posted by Raxel7851
That looks like a nice solution. Does it mount to the top of the existing square bumper?
|
I suppose either would work but I believe most mount it under the body, bolting it to the frame, as long as it doesn't extend lower than your jacks or other low point. I have one but haven't installed it yet.
__________________
Bob C
2002 Itasca Suncruiser 35U
Workhorse Chassis
|
|
|
08-05-2021, 06:12 PM
|
#6
|
Winnebago Owner
Join Date: Nov 2018
Location: DE.
Posts: 248
|
I bought the sewer hose storage unit Bob suggested. I like it, but the mounting holes are wider than my 2021 22M. I’m thinking of making some large U-bolts with a plate on the bottom of the bumper to attach it. I was also thinking of getting some 6” bolts and use the existing mounting bracket. But since it’s plastic, that may not be a good idea.
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
|
|
|
08-05-2021, 08:26 PM
|
#7
|
Winnebago Master
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 3,583
|
Quote:
Originally Posted by Raxel7851
I bought the sewer hose storage unit Bob suggested. I like it, but the mounting holes are wider than my 2021 22M. I’m thinking of making some large U-bolts with a plate on the bottom of the bumper to attach it. I was also thinking of getting some 6” bolts and use the existing mounting bracket. But since it’s plastic, that may not be a good idea.
|
Is your's returnable. The one I bought is adjustable as are many others:
https://www.amazon.com/Valterra-Adju...s%2C215&sr=8-2
It doesn't say on Amazon but the manufacturer's site lists it as adjustable from 50" to 94".
https://www.valterra.com/product/adj...3-black-boxed/
__________________
Bob C
2002 Itasca Suncruiser 35U
Workhorse Chassis
|
|
|
08-16-2021, 02:42 PM
|
#8
|
Minnie Winnie 26A
Join Date: Jan 2019
Location: San diego, CA
Posts: 65
|
Years ago Winnebago welded the bumper on, then switched to bolts with nuts. Most brands will not fit in the bumper. However the PrestoFit does fit in the bumper. I hqve 20 feet in my bumper.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
__________________
Minnie Winnie 26A, 2018
San Diego, CA
TOAD 2010 Jeep Wrangler
|
|
|
08-16-2021, 03:08 PM
|
#9
|
Winnebago Owner
Join Date: Nov 2018
Location: DE.
Posts: 248
|
Quote:
Originally Posted by BobC
|
Mine is adjustable. My issue is I wanted to mount it on top of the bumper. The bumper is 4” wide, but the spread on the mounting bracket that’s part of the storage unit is 6”.
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
|
|
|
08-16-2021, 04:39 PM
|
#10
|
Winnebago Master
Join Date: Apr 2018
Location: Tucson, AZ
Posts: 1,213
|
Quote:
Originally Posted by Raxel7851
Mine is adjustable. My issue is I wanted to mount it on top of the bumper. The bumper is 4” wide, but the spread on the mounting bracket that’s part of the storage unit is 6”.
|
Just screw some flat plates of the appropriate size to the top of the bumper then screw the carrier on. Or use giant zip ties like the HVAC ones if you don't want to put screws in your bumper.
I put my carrier underneath with the end right by the dump valve, I just drag it out and hook it up, makes it quick and easy.
__________________
Brian
2011 Winnebago Via 25Q on 2010 Sprinter Chassis
|
|
|
08-16-2021, 06:20 PM
|
#11
|
Winnebago Owner
Join Date: Nov 2018
Location: DE.
Posts: 248
|
Those are 2 great ideas BigB. I like the zip tie one. I’ll crawl under my unit to see if there’s a convenient spot to locate it there as well.
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|