Does Winnebago prewire Forza for a Winegard Connect 2.0 4G2 (WF2-435)? Is there a mark on the roof of where the cables are located?
I checked the roof and have not found any markings.
Has anyone installed there own unit?
I have not heard of them doing this. So, I doubt it. For sure if they had they would be very vocal about it.
Have you already purchased the Wingard 2.0? If not, there are other options you might explore. If you have then you'll need to either cut a hole into the roof to where you plan to install. Or find an existing hole that you can send the cabling through.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
I already purchased the unit and will try putting a tone on the coax cable intended for the satellite dish and drill roof pending on the tone. Found 12volt wiring installation wiring schematics on the Winnebago owners site. https://www.winnebago.com/Files/File...ram/Wiring.htm
From there you can select the year/model/ serial#. and drill down to the wiring diagrams. Hope to tackle the project in a couple of weeks.
There generally is a sticker on the roof where to drill to access the wires for the SAT dish. It's up front about 12" from the front cap apron (where the fiberglass cap ends and the roof starts) and right in the center of the roof.
Here's some photos:
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad