Hard to be definitive without knowing your model and floor plan.
But, assuming you have the typical table that folds down into the dinette to make a bed, you can either remove the two brackets holding the folding braces to the bottom of the table (usually 4 to 6 screws each) OR remove the wall bracket (8 or 9 screws).
Usually, both ends of the folding braces are "captured" when the brackets are screwed in place. So, can't be removed otherwise.
Fair Winds and Following Seas
__________________
Terry & Rosalina
2007 Winnebago Journey 34SE
Retired Navy Mustang & Navy Wife
|