Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-25-2022, 10:37 PM   #1
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
Slide issue on 2009 Vectra

we bought a 2009 vectra in May and have been out a couple times. A few trips ago the passenger slide started acting up and would retract intermittently. Jacks work, the other slide works fine . Just the passenger retraction. Reading this almost sounds like a Shuttle Valve issue?
ScrappyRVer is offline   Reply With Quote
Old 09-25-2022, 11:00 PM   #2
Winnebago Master
 
Eagle5's Avatar
 
Join Date: Mar 2019
Location: South Bend, WA
Posts: 1,546
Hi Scrappy RVer,
I took a look at your Owner's Manual, and starting on the bottom of page 10-4 it seems like another possible fault would be the electronic controller. Hopefully somebody with a similar issue can relay their experience to help you better.
Welcome to the forum.
Eagle5
__________________
2019 Minnie Winnie 22M on an E-450 frame
Eagle5 is offline   Reply With Quote
Old 09-25-2022, 11:04 PM   #3
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
Quote:
Originally Posted by Eagle5 View Post
Hi Scrappy RVer,
I took a look at your Owner's Manual, and starting on the bottom of page 10-4 it seems like another possible fault would be the electronic controller. Hopefully somebody with a similar issue can relay their experience to help you better.
Welcome to the forum.
Eagle5
I can hear the motor running when I hit retract. Not sure if that would matter ?
ScrappyRVer is offline   Reply With Quote
Old 09-25-2022, 11:08 PM   #4
Winnebago Master
 
Eagle5's Avatar
 
Join Date: Mar 2019
Location: South Bend, WA
Posts: 1,546
Well, perhaps the valve is bad, or the controller is not sending the correct signal to the valve, or perhaps it is a safety feature if the two sides are no longer synchronized. Mine is so different, I am just guessing.
Many folks read these forums in the morning hours, so hopefully we will get some good advice then.
Eagle5
__________________
2019 Minnie Winnie 22M on an E-450 frame
Eagle5 is offline   Reply With Quote
Old 09-25-2022, 11:31 PM   #5
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
Thank you for the reply. Itís appreciated
ScrappyRVer is offline   Reply With Quote
Old 09-26-2022, 01:29 PM   #6
Winnebago Master
 
Wayne M's Avatar
 
Join Date: Aug 2008
Location: Texas
Posts: 1,536
Is the slide hydraulic?
__________________
Wayne MSGT USMC (Ret) & Earlene (CinCHouse)
2015 Winnebago Tour 42QD - 2020 Lincoln Nautilus Reserve (TOAD)
(RVM-14) It is what it is, and then it is what you make of it.
Wayne M is offline   Reply With Quote
Old 09-26-2022, 03:07 PM   #7
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
it is hydraulic . Spoke to someone local and they think itís the retract solenoid
ScrappyRVer is offline   Reply With Quote
Old 09-26-2022, 08:13 PM   #8
Winnebago Master
 
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 3,315
Assuming it's an HWH slide, your best bet is to contact Paul Maddox, aka azpete. Paul Maddox is an HWH employee and Winnieowner who has helped out many of us with HWH issues.

Before you get too far into this, I suggest you contact him. He's published his direct email address and phone number both on Winnieowners and IRV2.com, so don't be bashful: (602-549-3638) and direct email address, [email protected]
__________________
Bob C
2002 Itasca Suncruiser 35U
Workhorse Chassis
BobC is offline   Reply With Quote
Old 09-26-2022, 11:18 PM   #9
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
Quote:
Originally Posted by BobC View Post
Assuming it's an HWH slide, your best bet is to contact Paul Maddox, aka azpete. Paul Maddox is an HWH employee and Winnieowner who has helped out many of us with HWH issues.

Before you get too far into this, I suggest you contact him. He's published his direct email address and phone number both on Winnieowners and IRV2.com, so don't be bashful: (602-549-3638) and direct email address, [email protected]
Thank you ! I sent him a email. It was a day of triumph and disapointment. Replaced the retract solenoid for it to retract twiceÖ then nope
ScrappyRVer is offline   Reply With Quote
Old 09-27-2022, 08:49 PM   #10
Winnebago Camper
 
Join Date: Sep 2022
Posts: 6
After talking with chuck at Stuartís , ended up replacing another solenoid and so far it is working well . Thank you for all the help.
ScrappyRVer is offline   Reply With Quote
Reply

Tags
slide


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide issue again! SAWTELLE General Maintenance and Repair 48 10-03-2015 10:10 PM
39K Galley Slide Support Issue doorguy General Maintenance and Repair 7 11-14-2014 02:00 AM
2012 42E FW Slide issue Finhawk General Maintenance and Repair 9 09-28-2013 09:04 PM
2002 Sightseer 27c Slide Issue [email protected] Winnebago Class A Motorhomes 13 09-23-2010 01:43 PM
Slide Issue AdrianLee General Maintenance and Repair 16 03-22-2006 01:06 PM

» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
×