How do you change the LED map reading light on a 2010 Adventurer? Is there
a bulb replacement or do you replace the whole unit? I cannot seem to be able
to get the bulb out.
Are you positive it's a LED light issue. Both of the map lights have double switches needed to be turned on for them to light up.
The driver's light you have to turn the dash light dimmer past full bright til it clicks - just like turning on a dome light in an older car - plus the switch on the fixture.
The passenger's light has a switch, usually on the dash or center console, to turn on as well as the light switch.
ON my 2017 Adventurer, the passenger light switch is at the bottom of the center of the dash right next to a switch to operate the "radio" on house power rather than just when the ignition is on.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
No, I am not positive that the lights are LED. Both lights work, however the passenger side is only partially lite. When I tried to remove either one ie.
unscrewing and/or pushing up and turning counter clockwise, neither one would
budge. On Winnabago's parts list you can purchase a Light, Reading, LED, Part
#174815-01-01A. Thus my inquiry. Any suggestions are greatly appreciated.
Linear Mode
