|
|
04-10-2020, 03:36 PM
|
#1
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
Insufficient light to see switches
We have a 2011 Winnebago Journey 40U and I cannot identify the panel of switches at the entry door. At night there is insufficient light so I have to use a flashlight to identify the switches to be sure I am operating the correct switch. The panel consists of 11 switches which operate the battery disconnects, the awning switches, the compartment switch and a few others that I cannot remember off the top of my head. An acquaintance of ours has a 2012 Journey, same model. His switches have back lights which iluminate the switches at night. I was contemplating switching mine out and getting the new switches as in the 2012 model. I contacted Lichtsin RV to get more info about doing this and they tell me the switches for both years are the same part number. Now i am confused. Did Winnebago build my coach with old parts?
|
|
|
04-10-2020, 04:18 PM
|
#2
|
Winnebago Master
Join Date: Jan 2020
Posts: 1,354
|
I am not familiar with your parts at all, but maybe yours has backlighting but it's no longer functioning or somehow turned off.
__________________
2019 2106 DS
2019 Colorado Duramax
|
|
|
04-10-2020, 05:23 PM
|
#3
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
I do not find anywhere to turn backlighting on or off. It is possible they are not working but I would have to take a switch out and see if there is any light source. Are there any other Journey or Meridian owners that have this problem or any owners with a unit that has backlighting
|
|
|
04-10-2020, 07:20 PM
|
#4
|
Site Team
Join Date: Sep 2009
Location: Spring Branch, TX
Posts: 7,818
|
I don't have the same RV, but I do have the switches by the door and each is backlit.
The movable part of the switch can be popped off and you'll see a small light bulb there in the middle of the actual switch once the cover is removed.
If none of yours is working... then it can't be all the bulbs burned out can it? Any other lights not working? Perhaps there is one resetable fuse for all the small lights like this?
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
|
|
|
04-10-2020, 07:56 PM
|
#5
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
Thx for that info. I will check that when I get it out of storage. Hopefully in 1 month. It seems strange that all lights would be out.
|
|
|
04-11-2020, 09:41 AM
|
#6
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
Creativepart. If u don't mind me asking, what rig do u have? Also is there a separate switch that turns the backlight on and off. My thinking was that if u were operating your rig on 12 volt u probably would not want the draw from the backlights but maybe it is negligible in the grand scheme of things
|
|
|
04-11-2020, 09:44 AM
|
#7
|
Winnebago Master
Join Date: Jan 2020
Posts: 1,354
|
Quote:
Originally Posted by Journey4us
Creativepart. If u don't mind me asking, what rig do u have? Also is there a separate switch that turns the backlight on and off. My thinking was that if u were operating your rig on 12 volt u probably would not want the draw from the backlights but maybe it is negligible in the grand scheme of things
|
Or along the same line of thinking, maybe it would be better to get some sort of small battery operated LED light. Something like this, but as small as possible.
https://www.amazon.com/Brilliant-Evo...6619816&sr=8-4
__________________
2019 2106 DS
2019 Colorado Duramax
|
|
|
04-11-2020, 10:52 AM
|
#8
|
Site Team
Join Date: Sep 2009
Location: Spring Branch, TX
Posts: 7,818
|
Quote:
Originally Posted by Journey4us
Creativepart. If u don't mind me asking, what rig do u have? Also is there a separate switch that turns the backlight on and off. My thinking was that if u were operating your rig on 12 volt u probably would not want the draw from the backlights but maybe it is negligible in the grand scheme of things
|
It's in my Signature on every post ( a good idea for everyone to complete). I have a 2017 Adventurer. It's a Gas Class A and a good many Journey parts are found in my coach. Without a photo of your switches I can't tell if your's are the same as mine.
By the way, I know about the lights IN the switches is because one of the outer covers popped off one day.
And no, there is not a separate switch to power the lights. They seem to be on whenever the power disconnects are turned on.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
|
|
|
04-11-2020, 11:24 AM
|
#9
|
Winnebago Master
Join Date: Jan 2020
Posts: 1,354
|
Quote:
Originally Posted by creativepart
And no, there is not a separate switch to power the lights. They seem to be on whenever the power disconnects are turned on.
|
Which would probably explain why they might all be burned out. Maybe a prior owner never disconnected power or stayed connected to shore power.
As another power saving suggestion, assuming the OP can find and replace the bulbs, only replace the bulbs on the switches they care to operate in the dark.
__________________
2019 2106 DS
2019 Colorado Duramax
|
|
|
04-11-2020, 11:44 AM
|
#10
|
Site Team
Join Date: Sep 2009
Location: Spring Branch, TX
Posts: 7,818
|
Tell you the truth, the lights don't really do that much. They kind of back light the writing on the button is all. I do have a small downlight at the stairs and another at the floor in the main hall. Those are on a switch in the main hall. I've never checked to see if that also controls the switch lights. Hummm, I'll have to look at that. I keep the floor lights on all the time so I've never noticed.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
|
|
|
04-11-2020, 07:57 PM
|
#11
|
Winnebago Owner
Join Date: Mar 2020
Posts: 87
|
Our 14 36m has the switches all backlit. It seems kind of odd to me that they are on 24-7 while using the coach. But, better that than fumbling around in the dark, I guess.
__________________
Pat & Becky
E. Wenatchee, WA
2014 Meridian 36M
|
|
|
04-19-2020, 06:07 PM
|
#12
|
2016 View 24J Profile
Join Date: Sep 2018
Location: Newtown, CT 06470
Posts: 83
|
Switch lighting
I have a 2016 View and have been concerned about this same issue. Just today I installed a ribbon LED light above my switch panel that is operated by a small red illuminated switch which is easy to see in the dark.
I used this same LED strip to illuminate the inside of the hanging closet and overhead cabinets.
|
|
|
04-19-2020, 06:14 PM
|
#13
|
Winnebago Camper
Join Date: Jan 2018
Posts: 16
|
I also have a 2011 40U journey - and keep a flashlight in the drink holder right above the switches. I am in the process of changing out the existing 12 volt lights with LEDs and am also thinking of motion detecting nightlights to help find the switches, especially after being outside after cocktail hours.
|
|
|
04-19-2020, 07:21 PM
|
#14
|
Winnebago Master
Join Date: Jun 2013
Location: Full-timer/volunteer w/SOWERS
Posts: 2,737
|
Quote:
Originally Posted by Journey4us
We have a 2011 Winnebago Journey 40U and I cannot identify the panel of switches at the entry door. At night there is insufficient light so I have to use a flashlight to identify the switches to be sure I am operating the correct switch. The panel consists of 11 switches which operate the battery disconnects, the awning switches, the compartment switch and a few others that I cannot remember off the top of my head. An acquaintance of ours has a 2012 Journey, same model. His switches have back lights which iluminate the switches at night. I was contemplating switching mine out and getting the new switches as in the 2012 model. I contacted Lichtsin RV to get more info about doing this and they tell me the switches for both years are the same part number. Now i am confused. Did Winnebago build my coach with old parts?
|
There are 2 switches under the cabinet over the dash. One is for the rope light over the cabinet and the other is to lithe the steps. I use this one when I want to see the switches by the door.
If you have used the rope light at all, please note that there is a known problem with the connector found over the passengers seat in the top of the cabinet just under the ceiling. If it shows signs of overheating cut the rope light back to a clear section and carefully insert the connector prongs into the wires.
Happy and healthy trails.
Rick Y
__________________
Rick & Melissa Young & Dawson (RIP), 2011 Meridian 40U, FL XCL, ISL 380HP/DEF, Al 3000 MH, 2014 Honda CR-V, SMI AF1, Blue Ox TruCenter & tow equip.,EEZTire TPMS.
Servants On Wheels Ever Ready. Best job we ever paid to do . (full time volunteers)
|
|
|
04-19-2020, 08:39 PM
|
#15
|
Winnebago Camper
Join Date: Jan 2012
Posts: 18
|
I have the switch set up on my 2009 Vectra. I found a short LED string light set (about 10" long) that has a glue strip on the back and 12" leads. I stuck it to the metal door frame and ran the the wires into the existing poor floor light and mounted on the switch panel and wired it into this light which is controlled by the outside porch light. Does a great job of lighting up the switches and inside entry way.
__________________
Roger
2009 Winnebago Vectra WKS40TD
2017 Ram 1500 toad
|
|
|
04-19-2020, 08:55 PM
|
#16
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
Where do you access the power for the LED lights?
|
|
|
04-20-2020, 05:20 AM
|
#17
|
Tim
Join Date: Jan 2016
Location: Ft. Myers, FL
Posts: 3
|
2017 Journey 40J. Check on the bank of switches over your bed ... I think there is a switch to toggle the lighted/not lighted switches on/off. I am sure I could have worded this better.
|
|
|
04-20-2020, 07:43 AM
|
#18
|
Winnebago Camper
Join Date: Apr 2020
Posts: 44
|
Can you remove the switch panel to access the switches back sides? Common practice when a gang of switches are all backlit, there will be a single wire for backlighting that will daisy chain them all. If the wire came loose or such, they all will loose backlighting.
__________________
2001 Brave 29SE, 7.4L Workhorse P32
|
|
|
04-20-2020, 08:06 AM
|
#19
|
Winnebago Camper
Join Date: Nov 2018
Posts: 9
|
Thx for that info. Unit is presently in storage but i will get to it this week and check on removing either an individual switch or the switch plate cover. Temps warming up and snow gone so I can access unit now.
|
|
|
04-20-2020, 09:17 AM
|
#20
|
Winnebago Watcher
Join Date: Aug 2018
Location: TEXAS
Posts: 2
|
I understand you issue with the 2011 Journey 40U. I had same issue, dark step area and inability to view correct rocker switches at night. No back-lighting, only LED illuminated when some switches are on. Not much help in dark. My solution was to mount a 3 LED downward facing 12 volt LED light above rocker switches. Lite is continually on, added 3 years ago, no issues to date. Also added 2 LED voltage meters at same time. Above new LED lite, one for Chassis, the other for House.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|