HWH jacks are on a pivot. they will swing in and out, not forward, rearward. The fluid level should be checked with the jacks retracted. As far as the location, listen for the location of the pump when running the jacks. The reservoir for the fluid will be attached to the pump. There will be a vent/cap on the top of the reservoir, unscrew it and it may have a built on dip stick. If not use a screwdriver and put it into the reservoir about an inch and you should see fluid on the end of the screwdriver. If needed this is where you fill the reservoir. If it is red use dextron, if it looks like motor oil use #10 motor oil.
|