2019 Intent 30r cameras

[IronGate]

Our video cable that connects to show the side and back up camera has come unplugged from unit. Where does this plug in?

[Wyatt]

Originally Posted by IronGate

Our video cable that connects to show the side and back up camera has come unplugged from unit. Where does this plug in?

There should be a yellow plug behind the radio. Take off the top cowl and look back there. What head unit do you have? Pioneer? You can probably Google the install manual.

[Morich]

I did a check of the drawing for the cameras and there are multiple plugs, which might lead to some doubt about the problem. If all three have failed, I might look for something that is more likely than all three unplugged?
I did a snip of the drawings for the cameras and marked a few thing for spotting. First picture is back of radio showing the cable which is noted as detail GB , marked on both in green. Detail GB is the second picture and shows the details of the cable from picture one. On the second picture, I marked in yellow the points where cameras connect as well as the camera switcher. I might lean toward looking at the switcher as a problem that would affect all three cameras?
Also on the first picture there appears to be a 10 amp fuse on the radio which might need a check if easy to spot. Marked in blue.
If you click on the pictures it may make them come up larger and clear to read better.
Best of luck on the bug hunt!!

[IronGate]

We have the pioneer. The blue rca cable is still plugged into the pioneer radio portion. It’s where it longs in to the other end we need to find. It looked to be coming from the direction of the steering wheel. We have looked at all the schematics but have no idea where the output plug in is located in the vehicle.

[IronGate]

I have no idea how to post a picture on here to show y’all.

[tanda62]

If yours is like mine the control board you see in the diagram Morich posted is down towards the steering wheel as you mentioned. I found if I lay down next to the center console I can reach up and in to this control board and the connection you are looking for is in the front of the board. If you take a flashlight and shine if from above where you accessed the back of your pioneer unit, you should be able to see the top of the board and the connections you are looking for. The board actually has labels for each connection. The blue cable connects to a splitter (which is black) above the control board which then connects to the board.

Hope this helps and good luck.
Tom

[Wyatt]

Originally Posted by IronGate

I have no idea how to post a picture on here to show y’all.

My way to upload a photo? Take a photo on your camera, then take a screen shot of that photo which will ensure the proper orientation when you post it

And here’s a screen shot of how to do that.