2003 sightseer slideout

[dale57]

The front motor on my kwickee electric slideout has quit working. Gives error code 11 no current front motor. I am in the process of verifying connections .

Does anyone know where the digisync module is located for this unit. ?
The main circuit breaker is in a box in the front bay on the passenger side.

[Taffy]

I have a 2004 engine & 2005 coach. . .Winnebago Sightseer. It took several years of jack problems with new computer boards, burnt out jack motors, jacks coming on with no one in the coach, etc. and no answers. Finally, a very smart young man had the diagrams for this time frame for the jacks and discovered that the jacks were installed with the wiring backward. Evidently, the wiring for the “cross-over” time should have been for 2004 but wiring was installed for the 2005 jacks. Not sure if your wiring has ever been checked?

[dale57]

Originally Posted by Taffy

I have a 2004 engine & 2005 coach. . .Winnebago Sightseer. It took several years of jack problems with new computer boards, burnt out jack motors, jacks coming on with no one in the coach, etc. and no answers. Finally, a very smart young man had the diagrams for this time frame for the jacks and discovered that the jacks were installed with the wiring backward. Evidently, the wiring for the “cross-over” time should have been for 2004 but wiring was installed for the 2005 jacks. Not sure if your wiring has ever been checked?

That had to be a nightmare.
Slide has worked fine till now.
Looking like the motor has died.
Found the sync module in the storage bay left of the door in case anyone needs to locate it.
Thanks