Iam trying to find access to the fresh water tank to install the sea leavel. I have looked all over this thing and no luck. On the rear I have the drain valve mounted on the out side. On the right side I have access to a small door that houses the fill line. I have been in the bays with no luck. The tank in inside a metel tank and sits between the frame rails.
Can and one help or post some pics????
Thanks
__________________
1999 Adventurer Pusher Model 34V ISB 5.9
Iam trying to find access to the fresh water tank to install the sea leavel. I have looked all over this thing and no luck. On the rear I have the drain valve mounted on the out side. On the right side I have access to a small door that houses the fill line. I have been in the bays with no luck. The tank in inside a metel tank and sits between the frame rails.
Can and one help or post some pics????
Thanks
__________________
1999 Adventurer Pusher Model 34V ISB 5.9
My front panel of the tank area rusted out, and I had to replace it. Behind the panel of thin steel was white styrofoam in 1" x 4" strips than ran the width of the tank. Then the poly tank.
I would think as thin as that metal was you could access it there, put some foam back in and a piece of metal screwed on with short 1/2" screws. That way if you ever needed in again you could.