I just purchased a 96 winnebago suncruiser 37 foot an I'm having trouble with the hwh 200 series leveling system. When I push the power button after applying the brake the board pops the fuse an nothing works. Jack's an tip out. Any help would be great ty in advance.
Too many potential causes to begin to guess, so it will require some testing. Most common thing to cause a fuse to blow is an obvious short in something. I would have to go with removing the wiring to the control, testing the wiring alone and determine in which direction the short will be.
It can be as expensive as the control board or as irritating as the wiring, so no way to tell until tested.
I might lean toward a bad board but then that is very much a guess.
Linear Mode
