I have just purchased an upgrade for my converter . The problem is I cant figure where the orange wire goes on new converter... there is the hot black....the ground green and then the orange which I'm asuming is another hot wire... but it's not mentioned in instructions and cant find a wiring diagram of my fuse panel anywhere as mine is old with ag fuses
Welcome, please provide more information. Is it a standalone or unit that mounts in the bottom compartment of a WFCO power box?
Also please share what year, make, model of Winnebago you are asking the question for.
Converters have a Positve 12 V and 12 Negative Ground connection, and 120 VAC power connection ( Hot / Black + Neutral / White ). There is also a ground that is normally bare or green.
__________________
Randy - Manhattan, Kansas
2015 Vista 27N
2020 Ford Escape Hybrid
Welcome, please provide more information. Is it a standalone or unit that mounts in the bottom compartment of a WFCO power box?
Also please share what year, make, model of Winnebago you are asking the question for.
Converters have a Positve 12 V and 12 Negative Ground connection, and 120 VAC power connection ( Hot / Black + Neutral / White ). There is also a ground that is normally bare or green.
Sorry I guess I should have said that the converter came with new fuse panel and I dont know where the orange wire goes on that... it's a 83 brave
Ok so update.... I have figured it out... I just hooked up what I was sure of... then tested everything... turns out it was my monitor panel.for lp gas..water levels... grey water..etc...so I just plugged it into the new fuse panel and voila it all works...