simple inverter install, this powers TV only, draws about 3AMP at 13v, wasn’t overly concerned about wire thickness since draw is so low. used existing wires that feed the radio. TV off draws about 0.2A
Install time was about one hour, simple.
Sometimes it’s nice to watch a movie but did not want to spend a ton of money, wiring and time on this so did like this.
What brand of inverter is that? Is this setup still worming good?
__________________
Bob & Shelly - 2022 Minnie 2529RG TT, 400AH LiFePo4 380W Solar
2016 RAM 3500 CC SRW SB Cummins
Remember, no matter where you go, there you are.
Thanks for the reply. I think I am going to go that route. Funny part is I was just looking at a 300w Giandel inverter on Amazon.
Thanks again.
__________________
Bob & Shelly - 2022 Minnie 2529RG TT, 400AH LiFePo4 380W Solar
2016 RAM 3500 CC SRW SB Cummins
Remember, no matter where you go, there you are.
Question. How exactly did you mount it to your TV?
__________________
Bob & Shelly - 2022 Minnie 2529RG TT, 400AH LiFePo4 380W Solar
2016 RAM 3500 CC SRW SB Cummins
Remember, no matter where you go, there you are.
Initially I siliconed it to the back of the TV, but I changed that and double sided taped it to the wall behind the TV now, cables zip tied to the moving arm.
__________________
Bob & Shelly - 2022 Minnie 2529RG TT, 400AH LiFePo4 380W Solar
2016 RAM 3500 CC SRW SB Cummins
Remember, no matter where you go, there you are.