One place monitor system

garybtt · 04-28-2007, 10:39 AM

Would anyone with a 2007 Vectra or a Horizon have a picture of the Monitor system with the auto start generator installed. I am adding the auto start to my 2006 and would love to see how Winnebago added this.

garybtt · 04-28-2007, 10:39 AM

Would anyone with a 2007 Vectra or a Horizon have a picture of the Monitor system with the auto start generator installed. I am adding the auto start to my 2006 and would love to see how Winnebago added this.

jimandsue60 · 04-28-2007, 10:57 AM

We have an 07 Vectra, I can take a picture but not till Monday or Tuesday. The auto gen start is really neat. Ours is set up with an HVAC system also. It will sense a call form the heater or air conditioner thermostat and turn the generator on also, regardless of battery voltage.

If no one else posts a picture I will do it next week.

Jim

garybtt · 04-28-2007, 11:05 AM

At present I do not know if I want to buy a new silkscreened chassis (the backpiece) or move my preheater to the old gen start area and place the new auto unit where the preheater and the propane and water heater switch was. Thanks

Harry B · 04-28-2007, 01:06 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Would anyone with a 2007 Vectra or a Horizon have a picture of the Monitor system with the auto start generator installed. I am adding the auto start to my 2006 and would love to see how Winnebago added this. </div></BLOCKQUOTE>

I added AGS and a Xantrex Link 20 to my 2005 Horizon. I made a new back panel for the One Place monitor panel and moved all the gauges up and removed the large engine heater switch and replaced it with a smaller 15amp switch. I was now able to add one more monitor which

I decided to make the Link 20 and mounted the AGS panel on the bathroom wall oposite the One Place Monitor panel. Worked like a charm.

You don't work much with the AGS other than turning it on or off or activating quiet time, so it being in on the bathroom wall works out fine

John_Canfield · 04-29-2007, 03:58 AM

I added Xantrex AGS to ours - details and pictures on the RV pages of our web site.

peter griffin · 04-29-2007, 06:36 PM

i moved the hotwater heater switch to the old generator switch (no longer need because the ec30 has a switch on it) and put the ec30 at the very top.

garybtt · 04-30-2007, 04:50 PM

That is what I will also do, plus I need to move the engine heat switch then i will have enough room for the Ec30. I hope to have some pictures when I am done. Thanks to all.

jimandsue60 · 05-05-2007, 11:44 AM

Sorry for the delay garybtt. Here is the picture.

Jim

garybtt · 05-05-2007, 01:21 PM

Thanks, I just finished the instalation and will post pictures tomorrow.

Pusherman · 05-05-2007, 03:35 PM

Gary,

Looking forward to seeing your install!

garybtt · 05-05-2007, 03:58 PM

I will be home all day Sunday if you want to stop by. Phone 594 9888

Pusherman · 05-05-2007, 04:02 PM

Gary,

Doing the MS walk in the morning. Will call you mid afternoon.

garybtt · 05-07-2007, 02:44 PM

here is the installed EC30 picture.

cbeierl · 05-07-2007, 04:38 PM

Here's your picture:

garybtt · 05-07-2007, 04:48 PM

What did I do wrong?

cbeierl · 05-07-2007, 04:55 PM

You had a link to your gallery, but not the pic itself. If you go to the gallery and open image itself and then check the properties or your address bar for the URL you should be all set. The gallery link would have given you a good link if you'd used the 'URL' button, but the 'Display Image' button requires s link to an image.