Hello,
I hope I am posting this on the correct forum.
Two weeks ago I purchased a Cummins EC-AGS+. The unit was very easy to install. However, last week I purchased another because the first one didn't work properly. Unfortunately, the second one didn't work properly either.
I have spent a great deal of time and effort to try and get both of these units to work. It is nearly impossible to call Cummins and find someone who even knows what this product is and what it's functions are. Even the Level II tech people know very little about this product. It is VERY frustrating trying to solve the problems with them.
The first unit had no LED, it basically worked except that I was unable to program the temperatures I wanted the genset to start at. I simply could not enter the numbers, just single digits from 7-9. I did factory resets, deleted and reinstalled the app, nothing helped. I also had a great deal of trouble "authenticating" the gateway when trying to connect, app telling me no Bluetooth connection when there was. Repeatedly. I assume this was because the unit was not pulsing the LED and looking for a connection. Each time I tried to re-connect to the gateway, I would have to force stop the app and then re-open it to connect. PITA!
Cummins refunded my money and told me to order a new unit. This one had an LED and seemed to work, until I tried entering the startup temps again. Can only go from 5-9 this time. Tech claimed it was my phone fonts or "too much zoom" whatever that is supposed to be. However, the app screen for that setup is EXACTLY the same on my device as it is in the user manual pictures explaining setup.
Then the unit lost the temp sensor, took 20 minutes to re-establish while holding them side by side. App tells you to look for the MAC address but there's no way to manually enter it. This is unacceptable, who has the time to go through this stuff every time they want to turn on the programming?
Then the AGS auto setup menu in the app disappeared. Gone. Vamoosed. So I cannot set up battery voltage starts or AC/temp starts. And since I have deleted and re-installed the app umpteen zillion times, I threw in the towel and gave up.
I think the hardware is basically good. I can do all the manual things with the app (starting & stopping, flipping back and forth between manual and auto operation). It turns on in auto mode when battery is drained also. I think the problem is a really crappy app. Really, really crappy app.
And one last caveat, the gateway has NO monitoring for shore power connection, So, it CAN and WILL start the genset while connected to AC if it senses low battery voltage or reaches the programmed ambient temp in the coach. Assuming that it is actually possible to set the temperature
I would be interested in any problems, similar or otherwise that anyone has had with these units. The concept is good but the execution sucks big time IMO. I would appreciate hearing the experiences of anyone else who has experience with this product.
And it goes without saying that if you have overcome the built in flaws, I would love to hear about them as well.
Thanks, Darwin