Thanks to you members I was able to locate my ODB2 plug. I have An 08 sightseer on a 07 ford chassis. The ODB2. Plug was attached to the right side of the steering column just up under the dash.
I used a 7mm deep socket to loosen the two bolts. It was easy to do even though I did it all by feel. I couldnít see up there. Once loose they unscrew by hand (using just the socket). Once off the columns undo the tape holding the extra cable into a bundle.
I then used a 3/32 drill to put two pilot holes into the lower valance of the dash board. Then I used the original mounting screws to mount it in a convienient location. In the picture it looks like it might interfere with your leg by the throttle pedal but it doesnít.
Easy peasy. Now I can put in my ODB2 reader and watch everything on my iPad
BTW, Iíve downloaded FORScan and a couple other apps for ODB2. ANYONE HAVE ANY ADVICE OR EXPERIENCE. oops. Ignore uppercase.