GoPower controller on 2022 1708FB

[KevinK]

Hi I have a new 2022 1708FB, two 12V AGM batteries and a GoPower controller for the solar panel that came with unit. My question relates to the battery status shown on the GoPower controller - it never shows a 100% full status. Be it from solar charging of shore power charging.

The battery status indicator on the inside of the 1708FB(wall panel) will show full charge.

Do other owners see 100% full battery status on GoPower controller ?

Thanks
Kevin , MT

[No1Hunter]

Do other owners see 100% full battery status on GoPower controller ?

Yes, but I only have one lead-acid battery.

[BobC]

I don't know if this is the problem but:

You should check out the manual for your controller. If you don't have it, it should be accessible online. Once you have the manual, check to see if there are settings for different battery types and how to change them. If so, double check to see if it's set properly for your battery type.

[No1Hunter]

Yes, there are settings for different type of batteries. I was out by the TT yesterday and happened to look at the controller. It said "FULL".

[KevinK]

Originally Posted by No1Hunter

Yes, there are settings for different type of batteries. I was out by the TT yesterday and happened to look at the controller. It said "FULL".

Thanks - I calls go power , then said that the battery status detection circuit can and often shows the nearly full status , even if batteries are fully charged. I am good