Thoughts about why the picture from our backup camera is and always has been fuzzy? (Yes, I've cleaned the lens thoroughly.) The side-view pictures are clear as a bell. Unfortunately, I've never had an owner's manual for the camera, and the unit itself gives no manufacturer name. I suspect I'm just going to have to replace the camera. If so, any recommendations about brand?
Could there by moisture behind the lens? I would suspect something like that before changing the camera, but you might find you can't open it to clean it anyway.
__________________
2006 Itasca 33V Suncruiser V10, Ford Edge toad
Thanks for the great idea, Jerry. It appears I'll be able to remove the lens cover to give everything a thorough cleaning. I'll provide an update after I do.
we have a 2009 adventurer and our rear camera stopped working,no picture at all, but the two side ones worked .my wife took 3 screws out of the panel and grabbed a plug that went into camera,moved it a little and camera came on. the two plugs that were for the side cameras went in straight but the plug for the rear camera went up around a bracket then back down and it caused it to vibrate loose. she got the wire straight and plugged it in,taped it up pretty good and that fixed it.
Linear Mode
