I have a 2010 Itasco Suncruiser and the front window shade only comes down about 1/3 of from windshield. What am I forgetting to allow this to happen? Emergency brake engaged etc…
When I press the shade switch for either one they will only go down like 1/3. So I do hear the motor run to that 1/3 down. Both goes up from that position with no problem. I read in the manual that it is 12volt. Not sure it getting the correct voltage but I think it is since the coach’s motor is running. What else can I check. Any safety items I’m missing?
If you have the coach ignition OFF and they still do this, then you need to look at reprogramming the UP/DOWN stops. Tucked up in the corner of your windshield valance you'll find two dangling wires with buttons on the bottom. You use those to program the stops.
Linear Mode
