Front entrance door STEP switch
Here's one for ya !
For some reason....when I am driving, the electric door step is in and stowed, the way it should be. IF I turn on the generator, the STEP goes out and will stay out. IF I shut off the generator the step goes back in. I put a new door connector on. The magnetic side attached to the lower corner of the screen door. The other piece has two wire connected to it, mounted in door frame to contact the other. NO MATTER which way I wire the 2 wires, the following happens. Step is OUT. Close door, the step stays. Open the door, step goes in. Switch wires, the same happens. Any ideas on the gen/step problem OR the step reversing it's open and closed positions? Thank you.
|