When returning to RV park from getting engine miss fixed I noticed the blower motor only worked on hi speed. I looked for a loose wire or blown fuse, found nothing. Could it be a bad switch??
When returning to RV park from getting engine miss fixed I noticed the blower motor only worked on hi speed. I looked for a loose wire or blown fuse, found nothing. Could it be a bad switch??
Stearn, check the link that Ding-a-ling gave you. It is my saga of fixing my dash air. Hopefully it will be of assistance to you. There is another link you will find there to pictures of how mine was set up. Hope this helps you find the problem.
__________________
Tom and Barb
'07 Winnebago Voyage 35L
Workhorse W22 chassis FMCA 219315
That is caused by the resistor failing. It is located under the hood on the heater/AC housing. It has a 4 pin connector and is held in place by 2 screws and sealed with silicone. Replace the resistor, and all will be fine.