Back-up camera fuse

lenOrge · 03-27-2015, 12:55 PM

Hi, and Good Morning. Can anyone please tell me where the fuse for the back-up camera is located in my 2003 Winnebago Brave 34D. Thanks.

Clay L · 03-27-2015, 01:34 PM

What Chassis do you have?

lenOrge · 03-27-2015, 02:04 PM

The M/H is a Workhorse W20

lenOrge · 03-27-2015, 03:30 PM

You know what.....The motor for the forward cabin heater suddenly stopped working too. Could these be connected.

bobmac · 03-27-2015, 08:03 PM

My Voyager B&W CRT Monitor has an in-line fuse located about 10" behind the CRT connector. Unfortunately ,it was on top of the monitor under the dash.

DancinCampers · 03-28-2015, 07:35 AM

On my 03 Adventurer, it was located drivers side under dash. Lift up dash, should be a small fuse box added by Winnebago mounted on top of another larger fuse box. On mine, the camera and coach heater were on same fuse.

lenOrge · 03-28-2015, 08:37 AM

Thank You DancinCampers. I am going to look for the fuse location that you suggested. I had a feeling that the 2 systems were on the same fuse.

lenOrge · 03-28-2015, 09:28 AM

Thanks Dancin.....Found the bad blade 15 amp fuse. Drivers left side. Got to love Irv2.

Clay L · 03-28-2015, 10:51 AM

On my rig wires from the same fuse go to the rear heater fan (MotorAid), the steps control board (so steps come in when engine is running), the AUX solenoid (connects the alternator to the house batteries) and the back up monitor. The wire going to the fuse comes from the RUN terminal on the ignition switch.