2014 Journey lippert jacks

[ElCamino]

Low voltages warning is on even when engine is running

Also gen set has vow voltage no start UNLESS engine is running

I have replaced all 8 batteries with Napa orig eq.

Cleaned or replaced all cable connections I can find.

Grounds are on frame and I have cleaned all I can find.

Are there any hidden grounds or pos connection.

Thanks for any and all help

ElCamino

[macnut]

Welcome to the forum. I agree that it sounds like a battery issue. We’re you able to verify you hooked up the new batteries exactly as the old ones? Hopefully, a few of our 12 volt experts will weigh in.
Al

[creativepart]

I'd check the chassis battery. Pretty sure both Gen start and Jacks are powered by the chassis batteries. Could be you got a bad battery or a bad connection.

Do your slides show any low voltage errors?

[ElCamino]

Your correct the Chassis batteries do the work, both are new both test 100%
The slides operate off the same battery and I have been concerned but no indication.
I still think it's a negative (grounding) problem but can't find the grounding lug on the frame near the chassis batteries. Any ideas? Thanks

[Wayne M]

There is a reset procedure for LCI Jacks. Give them a call and have them email the procedure to you. They may give you some other advice as to what is going on.