Anyone here have experience with installing a window replacement for the door? Pros, Cons, or tips? Ours is currently the factory installed translucent glass. I am looking to replace with the dark tinted integrated shade item below:
AP Products 015-201512 Slim Shade Door Window Upgrade
I’d measure it and go ahead if it looks like it will fit. Ours has the dark tinted window and shade unit (from the factory). I seem to recall seeing YouTube videos that cover the installation process. I briefly considered this project on my previous trailer.
The Winnebago travel trailers are not nearly as bespoke as the motorized units (most things are purchased from traditional vendors just like other trailer manufacturers).
2021b Micro Minnie 2100BH
2017 Ford F-350 SRW diesel
I shattered my tinted door window while using my weed whacker too close to the RV. I took out the old window frame and removed all the broken glass. I then ordered a piece of smoke colored Lexan to the same size with radiused corners from an online custom plastic place. I then put the plastic in with lots of mastic and resealed the frame when I installed it in the door. You can't tell it's not glass and this one won't break. Saved about $300 by doing it myself.
Scott and Martha Baker Julian, CA
2016 Sunstar LX 27N, 2016 Ford Fiesta as Toad
I was very interested in replacing my hazy door window with one of those. There are none made to fit my 2008 Journey. Also, you do have to open door to adjust due to screen door. Plan to stick with darker tint replacement by Winnebago.