My Oasis Elite door awning was stuck in the closed position. I heard clicking when I tried to open it so I knew it was getting power. I Googled the problem and it let me here
"Oasis elite door awning stuck closed"
Post #18 was the game changer for me. The poster provided detailed steps and pictures. I could not get behind the top left of the motor rear end cap due to the position of the main awning arm rail open or closed. So I followed the process that the poster did. I disassembled the motor in place following his directions. Once the motor was slightly loose it was able to open with the switch. The only problem I found was tons of rust on the bottom of the rotor shaft. Mine has a small bulb or ball at the end that fits in the hole in the bottom end cap. The cap was full of rust also. I removed the rust. Reassembled the motor and reconnected the wires. Tested it and it works fine now. Really glad we RV'ers have a good place like this to look for answers.