Hello! Me and my family just purchased a used 2018 Minnie Winnie 22m. I am struggling with taking off the wheel covers. I found that the previous owner did not leave me any tool to remove the lugs on the covers. They look similar to the photos shown here with the star in the center decal... http://www.winnieowners.com/forums/f...ff-244788.html
Anyone help with these? Are there 2 of the lugs I need to find to take off to remove?
As a quick reply to this - I found that none of the lugs could be removed and were all decoration. I used a nail bar to gently remove the wheel cover and used a rubber hammer to replace.
Small point for those who may wonder later. If you have the wheel simulators which are held on with two removable lug nut looking gizmos, they will be marked with a notch pressed into the side. Look for the notch to ID and remove with whatever tools is onhand. There is a "standard" tool but careful use of large pliers and padding gets it done also.
Linear Mode
