Thread Tools Search this Thread Display Modes
Old 12-03-2017, 10:00 PM   #1
Winnebago Watcher
Join Date: Dec 2017
Posts: 2
Lost all power to my HWH control panel

Lost all power to my slides and jacks while driving. The jacks down light and alarm came on while driving my 2007 Vectra at highway speeds. Pulled over and did a visual on the jacks, then noticed that all my lights on my control panel went out. Bottom Line I have not been able to find a fuse or C/B to replace or reset to get my power back. Real pain not being able to access my clothes.
mouldboy is offline   Reply With Quote
Old 12-04-2017, 07:28 AM   #2
Winnebago Owner
Join Date: Oct 2014
Location: Cypress River Manitoba
Posts: 84
Something to look for I found was that the connectors going INTO the control box (the one with the clear Plexiglas front) became loose. Mine is a deep reach down from the front, so I would get a picnic table or some such and put it right in front of the coach. Then I could climb up on it and reach waaay down and push each of the connectors in a bit. I think there are four of them. Bet ya one is out just enough to deprive the box of power. Oh yea, one of them has thicker wires than the rest. I think that's the power supply. Good luck


There are a bunch of fuses inside the control box.
2004 Itasca Sunrise W22 chassis GM 8.1 Allison 1000 Towing a 2007 Chevy Cobalt four wheels down.
Switchflicke is offline   Reply With Quote
Old 01-16-2020, 02:41 PM   #3
Winnebago Watcher
Join Date: Jan 2020
Posts: 1
I have lost power to the levelers. I believe that I have kicked a fuse. I can't find the fuse. I checked all the fuses under the dash board (2011 Sightseer 33c) - they look good. Can anyone suggest where the fuse might be or where I can find a wiring schematic/fuse chart?
DSeler is offline   Reply With Quote
Old 01-16-2020, 02:46 PM   #4
Site Team
ThomB's Avatar
Join Date: Feb 2017
Location: Pinellas Park, FL
Posts: 499
There may be some under the hood too.

I also have a bunch of 12v push breaker fuses in the electric panel (none are the jacks) with my 120v breakers.

Diagrams start here:

The panel is showing on this page: but not sure that's going to help much.
Thom Boles
2010 Winnebago Vista 32K with a 2013 Mini Cooper S Roadster toad.
ThomB is online now   Reply With Quote
Old 01-16-2020, 07:33 PM   #5
Join Date: Jul 2006
Location: Michigan
Posts: 342
OP, unscrew the control panel and gently ease it away from the console. Check the cable going into the back of the display. You may have just lost communication to the display panel rather than a complete power loss of the system control box.
Ed & Joie
2004 Vectra 40KD
Freightliner Chassis and Cummins ISC
emiddleb is online now   Reply With Quote

hwh, panel, power

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Access to bulb over All In One Control center ziaptrn Winnebago Class A Motorhomes 1 12-09-2017 06:30 PM
Power management control panel wdweldon Electrical | Charging, Solar and Electronics 15 09-05-2016 10:38 PM
Where to buy: Dimensions Control Panel? theroc Winnebago General Discussions 8 06-14-2011 02:21 PM
Question? Control panel removal on 2004 Meridian wagonmaster2 Winnebago Class A Motorhomes 6 07-28-2006 07:05 PM
Control Panel @ 50 AMPs John and Elaine Electrical | Charging, Solar and Electronics 12 10-15-2005 04:58 AM

» Featured Campgrounds

Reviews provided by


This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 03:07 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.