When I push the Livingroom slide out or in, before it reaches its stop point it is ½” out of alinement. I mean the front (headlight) edge of slide (is say) 25” the rear edge of slide (taillight) 24 ½”. When the slide reaches its stop point, in or out, it evens out and stops.
Is this normal, or is this an early sign of a problem?
__________________
Army NCO on inactive duty
2002 Winnebago Adventurer 35U on a Workhorse W22 Chassis
Sounds like your left and right motors are not in sync. Do this:
Run both out and hold the switch closed for at least three seconds when it stops. Run it in a couple of feet. Repeat 2-3 times. Leaving the switch on when it stops, lets the motors synchronize.
Sounds like your left and right motors are not in sync. Do this:
Run both out and hold the switch closed for at least three seconds when it stops. Run it in a couple of feet. Repeat 2-3 times. Leaving the switch on when it stops, lets the motors synchronize.
David
I have HWH hydraulic rams (2) on the slide, will that work for this?
__________________
Army NCO on inactive duty
2002 Winnebago Adventurer 35U on a Workhorse W22 Chassis
Linear Mode
