|
08-20-2010, 05:21 PM
|
#1
|
Winnebago Camper
Join Date: Aug 2001
Location: Head of St Margarets Bay,NS,Canada
Posts: 28
|
Key Blanks
For a 2005 Itasca 35U on a Dec 2004 W22 gas chassis
Can someone who has had compartment, deadlock and ignition keys made locally on non-Trimark and Non- Workhorse blanks please tell me the blank manufacturer and his code number.
I just got a extra key made for the ignition but it does not fit in the ignition assembly because the 'handle' does not fit within teh ears on teh ignition assembly
There are no Workhorse or Winni dealers in my home province
Thanks
Preston
__________________
Apr 05 Itasca Suncruiser 35U on Dec 04 W22 Chassis
All of the best and safe driving,
|
|
|
08-20-2010, 06:59 PM
|
#2
|
Winnebago Owner
Join Date: Sep 2002
Location: Anderson, SC USA
Posts: 117
|
You can get replacement keys from online Winnie dealers by supplying your VIN. I got a set from Lichtsinn already cut and ready to go.
__________________
Winnebago Coach Forum Member
2004 Winnebago Vectra 40AD
|
|
|
08-20-2010, 08:46 PM
|
#3
|
Winnebago Master
Join Date: Dec 2005
Location: Buxton, North Dakota
Posts: 1,037
|
I don't have a Workhorse ignition key, but the compartment key blanks were Chicago Lock and Ilco. Got all my keys made locally.
__________________
2003 Winnebago Adventurer 38G F53/ V10 605 watts of Solar
1999 Winnebago Brave 35C Handicap Equipped
F53/V10
1999 Jeep Cherokee & 1991 Jeep Wrangler Renegade
|
|
|
08-21-2010, 07:13 AM
|
#4
|
Winnebago Master
Join Date: Nov 2004
Location: On the Road Westward
Posts: 711
|
Mine are:
Ignition= Ilco B86-P
Deadbolt=Ilco TM14 (other #'s on key 1622 and KS201)
Compartment= Ilco TM13 (other #'s on key 1621 and KS101)
__________________
Dan & Sharon & Kasey (Our Yorkie Puppy (12 Yrs Old) On the Road (2012 Journey 36M, 2006 Jeep Liberty)
USN-Ret ('65-'93) Fulltimers, Class of 2012
|
|
|
08-21-2010, 07:58 AM
|
#5
|
Winnie-Wise
Join Date: Oct 2009
Posts: 277
|
I got my extra keys from Lichtsinn Motors. They sell the finished keys all cut and ready to use. Joe
__________________
2008 Itasca Latitude 39W. Cummins ISB 6.7 Turbo 340HP. Allison 6 Speed. Freightliner XCS. Michelin XRV 255/80R 22.5 LRG. SuperSteer MCU. Safe-T-Plus.
|
|
|
08-21-2010, 08:31 AM
|
#6
|
Winnebago Master
Join Date: Mar 2009
Posts: 851
|
Though I can not help you with the blank number I can tell you that a Dremel (TM) Hand grinder or it's equivlent can easily machine down that head so it fits, takes just a few minutes if you are used to doing that kind of thing.
Very useful tool.
WARNING however.. IF you have an electronic lock/key this might not work as the electronic keys have electronics in the head.. I do not have that kind of lock on my Workhorse. I do not know if Workhorse offers that kind of lock.
GM (And Ford) do on some cars.. But I do not know if it's offered on the Workhorse chassis.
__________________
Home is where I park it!
[SIGPIC][/SIGPIC]
|
|
|
08-22-2010, 01:24 PM
|
#7
|
Winnebago Camper
Join Date: Aug 2001
Location: Head of St Margarets Bay,NS,Canada
Posts: 28
|
Thanks for your replies folks
Dan's key numbers are exactly what I needed - I will contact the locksmith in the area with the largest key selection who apparently has Trimark blanks
Preston
__________________
Apr 05 Itasca Suncruiser 35U on Dec 04 W22 Chassis
All of the best and safe driving,
|
|
|
08-22-2010, 01:54 PM
|
#8
|
Winnie-Wise
Join Date: Jan 2005
Location: south NJ
Posts: 423
|
If it is a workhorse-(chevy) chassis then U can go to a Chevy dealership for the ignition key. Same as Ford. I Got my tri mark blanks from OCEAN Lakes Campground in Myrtle Beach SC. They cut them right there at the store.
__________________
2001 32-V Suncruiser,Ford V-10, 310 HP, 4 Koni FSD's, KVH Tracvision,trickle charge, awning travel lock, 1 dinning room slide; no roof leaks, 03malibu toad sometimes, Blackhawk all terrain towbar, Roadmaster brake Pro,1 wife,1 westy, life is good!
|
|
|
09-07-2010, 06:41 AM
|
#9
|
Winnebago Camper
Join Date: Jun 2010
Location: South Lyon, Michigan
Posts: 23
|
prsmith,
The spares I had made were:
Ignition: ilco P1109 B92
Door: ilco 1621 TM13
Compartment ; 1622 TM14
Fuel Door ; ilco 1609 TM9
You may have to hunt around for a key shop that carries them.
|
|
|
09-09-2010, 11:55 AM
|
#10
|
Winnebago Watcher
Join Date: Aug 2010
Location: Warren
Posts: 3
|
My local Camping World had all the blanks needed for my Winnie
|
|
|
09-10-2010, 09:18 AM
|
#11
|
Winnebago Camper
Join Date: Aug 2001
Location: Head of St Margarets Bay,NS,Canada
Posts: 28
|
Finally got my spares made up - found a Hardware store that is also the regional supplier for Ilco Blanks
eadbolt ILCO 1622/TM14
Compartments/driver's door/non-deadbolt lock in main door ILCO 1621/TM13
WH Ignition ILCO P1107 B89
There seems to be variety of the Ignition key - probably it has to do with the size of the key head
In any case, thanks to everyone who responded - you were great help to me
Preston
Quote:
Originally Posted by Eric n Karen
prsmith,
The spares I had made were:
Ignition: ilco P1109 B92
Door: ilco 1621 TM13
Compartment ; 1622 TM14
Fuel Door ; ilco 1609 TM9
You may have to hunt around for a key shop that carries them.
|
__________________
Apr 05 Itasca Suncruiser 35U on Dec 04 W22 Chassis
All of the best and safe driving,
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Key Stuck in the Ignition
|
ichn2go |
General Maintenance and Repair |
1 |
01-17-2009 11:22 AM |
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|